We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM 1.5TB 16x96GB DDR5 4800 CL40 2Rx4 ECC RDIMM Supermicro H13DSG-O-CPU-D

SKU CH-ACF9-ZVQA3

1.5 TB DDR5 registered ECC server memory kit with sixteen 96 GB modules at 4800 MT/s, CL40, 1.1 V, 2Rx4, 288-pin, validated for Supermicro H13DSG-O-CPU-D

  • Capacity1.5TB (16 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes
  • 5 TB total capacity from 16 modules of 96 GB each
  • DDR5-4800 speed with CL40 latency for rated server performance
  • Registered ECC architecture corrects single-bit errors on the fly
  • 1 V operating voltage matches the motherboard's memory controller spec
  • 288-pin RDIMM form factor fits the Supermicro H13DSG-O-CPU-D exactly

Compatible Supermicro Server Memory Kit

This 1.5TB kit contains sixteen 96GB DDR5-4800 Registered ECC RDIMMs built for the Supermicro H13DSG-O-CPU-D motherboard. Each module runs at 1.1V with CL40 latency and a 2Rx4 organisation. The 288-pin Registered design matches the board's memory-controller requirements exactly.

For Fully Populated Enterprise Servers

It suits administrators who need maximum supported capacity in every slot with error-correcting, buffered stability. It is not for workstations or desktops that accept only unbuffered UDIMMs, nor for boards limited to lower-density modules or different voltage requirements.

Registered ECC Architecture Decides Fit

The motherboard must support 2Rx4 Registered DDR5 RDIMMs at the specified speed and voltage; otherwise the system will not recognise the full 1.5TB or will fall back to a slower rate. Verify the manual's qualified-vendor list and population rules before ordering.

Highlights

  • 5 TB total capacity from 16 modules of 96 GB each
  • DDR5-4800 speed with CL40 latency for rated server performance
  • Registered ECC architecture corrects single-bit errors on the fly
  • 1 V operating voltage matches the motherboard's memory controller spec
  • 288-pin RDIMM form factor fits the Supermicro H13DSG-O-CPU-D exactly

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-9624K16
Capacity1.5TB (16 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content1.5TB 16X96GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Does the Supermicro H13DSG-O-CPU-D motherboard need all 16 DDR5 4800 RDIMM slots filled for this 1.5 TB kit to run at rated speed?

The kit is spec-matched to the board's memory-population rules; consult the motherboard manual for the approved DIMM installation order to achieve full 4800 MT/s operation with all 16 modules.

Can I keep any existing DDR5 RDIMMs installed while adding this 16-module 4800 CL40 2Rx4 ECC kit?

Mixing ranks, speeds, or timings can prevent full-capacity recognition; the board's manual defines which slot combinations are validated for registered ECC DDR5 modules.

How do I confirm the 1.5 TB DDR5 4800 CL40 kit is running at its rated speed and capacity after installation?

Enter the BIOS or UEFI and verify the memory frequency reads 4800 MT/s, total capacity shows 1.5 TB, and ECC status reports active for all 16 installed RDIMMs.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.