저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Eight green DDR5 RDIMM sticks in anti-static tray

NEMIX RAM

NEMIX RAM 128GB (8x16GB) DDR5 4800 CL40 ECC RDIMM memory upgrade

SKU CH-S75G-V4ADM

Eight 16 GB DDR5 registered ECC modules totalling 128 GB at 4800 MT/s CL40 for Supermicro servers

  • Capacity128GB (8 x 16GB)
  • SpeedDDR5 4800 (PC5 38400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 128GB total capacity across eight 16GB modules
  • DDR5 4800 speed with PC5-38400 bandwidth rating
  • ECC registered RDIMM ensures data integrity
  • 1V operating voltage for efficient power use
  • CL40 CAS latency at 1Rx8 rank configuration

128GB DDR5 4800 ECC RDIMM kit

This 128GB kit contains eight 16GB DDR5 4800 registered DIMMs with ECC and a CAS latency of CL40. It is built for Supermicro servers such as the SSG-521E-E1CR24H, SSG-521E-E1CR24L and X13SEDW-F platforms. The modules run at 1.1V and use 1Rx8 organisation. They are intended for IT professionals who need validated, high-capacity memory for mission-critical workloads.

Sustained-load behaviour

Registered buffering and on-die ECC keep data integrity stable during continuous server operation. The 1.1V operating voltage helps limit thermal output when all eight slots are populated under heavy throughput. Modules are stress-tested under load before shipping to verify reliability in 24/7 environments. The 1Rx8 layout supports consistent bandwidth across multi-channel configurations.

DDR5 4800 interface limits

The DDR5 4800 standard caps transfer rates at PC5-38400, so this kit cannot exceed that bandwidth ceiling. CL40 latency is fixed by the JEDEC base specification for this speed grade. Registered DIMMs add one clock cycle of command delay compared with unbuffered modules. The 288-pin form factor fits only DDR5 RDIMM slots and is not compatible with UDIMM or earlier DDR generations.

주요 특징

  • 128GB total capacity across eight 16GB modules
  • DDR5 4800 speed with PC5-38400 bandwidth rating
  • ECC registered RDIMM ensures data integrity
  • 1V operating voltage for efficient power use
  • CL40 CAS latency at 1Rx8 rank configuration

사양

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR38400-618K8
Capacity128GB (8 x 16GB)
SpeedDDR5 4800 (PC5 38400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 RDIMM
Rank1Rx8
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content128GB (8X16GB) DDR5 4800MHZ PC5-38400 1Rx8 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory KIT

이 상품에 대한 질문

Does the 1.1V DDR5 4800 kit run hotter than standard-voltage modules in a fully populated Supermicro SSG-521E?

The 1.10V operating voltage is the standard DDR5 level, so power draw per module is typical for registered DDR5; with eight 1Rx8 sticks installed the total load is higher, but the Supermicro platform's memory-slot airflow is designed for full populations.

Must the Supermicro X13SEDW-F motherboard already be in place for this 288-pin RDIMM kit to function?

Yes — the modules are 288-pin DDR5 RDIMMs keyed for registered server boards, so a compatible Supermicro motherboard with DDR5 RDIMM slots is required before installation.

Will the CL40 1Rx8 registered DIMMs work alongside older DDR5 4800 ECC modules I keep from another server?

Mixing ranks or CAS latencies can prevent the memory controller from training at 4800 MT/s; for stability, populate all eight slots with this matched 1Rx8 CL40 kit rather than combining it with different modules.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.