SK hynix HMA42GR7AFR4N-TF 16GB DDR4 2133MHz CL15 ECC Registered Dual Rank 1.2V 288-Pin Server RAM
- 16GB
- 288-Pin DDR4 SDRAM
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
NEMIX RAM
Eight 16 GB DDR5 registered ECC modules totalling 128 GB at 4800 MT/s CL40 for Supermicro servers
This 128GB kit contains eight 16GB DDR5 4800 registered DIMMs with ECC and a CAS latency of CL40. It is built for Supermicro servers such as the SSG-521E-E1CR24H, SSG-521E-E1CR24L and X13SEDW-F platforms. The modules run at 1.1V and use 1Rx8 organisation. They are intended for IT professionals who need validated, high-capacity memory for mission-critical workloads.
Registered buffering and on-die ECC keep data integrity stable during continuous server operation. The 1.1V operating voltage helps limit thermal output when all eight slots are populated under heavy throughput. Modules are stress-tested under load before shipping to verify reliability in 24/7 environments. The 1Rx8 layout supports consistent bandwidth across multi-channel configurations.
The DDR5 4800 standard caps transfer rates at PC5-38400, so this kit cannot exceed that bandwidth ceiling. CL40 latency is fixed by the JEDEC base specification for this speed grade. Registered DIMMs add one clock cycle of command delay compared with unbuffered modules. The 288-pin form factor fits only DDR5 RDIMM slots and is not compatible with UDIMM or earlier DDR generations.
| Brand | NEMIX RAM |
|---|---|
| Series | SuperMicro Server/Workstation Compatible Series Memory |
| Model | SuperMicro DDR5 4800MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR38400-618K8 |
| Capacity | 128GB (8 x 16GB) |
| Speed | DDR5 4800 (PC5 38400) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Supermicro |
| CAS Latency | CL40 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 RDIMM |
| Rank | 1Rx8 |
| Features | DDR5 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 128GB (8X16GB) DDR5 4800MHZ PC5-38400 1Rx8 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory KIT |
The 1.10V operating voltage is the standard DDR5 level, so power draw per module is typical for registered DDR5; with eight 1Rx8 sticks installed the total load is higher, but the Supermicro platform's memory-slot airflow is designed for full populations.
Yes — the modules are 288-pin DDR5 RDIMMs keyed for registered server boards, so a compatible Supermicro motherboard with DDR5 RDIMM slots is required before installation.
Mixing ranks or CAS latencies can prevent the memory controller from training at 4800 MT/s; for stability, populate all eight slots with this matched 1Rx8 CL40 kit rather than combining it with different modules.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?