저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Eight green DDR5 RDIMM modules in anti-static tray

NEMIX RAM

NEMIX RAM 1TB (8x128GB) DDR5 4800 CL40 ECC RDIMM SuperMicro X13SEW-TF X13SEW-F

SKU CH-E5DN-R0D51

1 TB DDR5-4800 ECC registered server kit of eight 128 GB modules at CL40 and 1.1 V for SuperMicro X13SEW motherboards

  • Capacity1TB (8 x 128GB)
  • SpeedDDR5 4800 (PC5 38400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 1TB total capacity across 8 matched 128GB modules
  • DDR5 4800 speed rated at PC5-38400 bandwidth
  • ECC registered design detects and corrects data errors
  • CL40 latency at 1.1V operating voltage
  • Validated for SuperMicro X13SEW-TF and X13SEW-F motherboards

1TB DDR5 ECC Registered Kit

This kit provides one terabyte of DDR5 memory across eight 128GB registered DIMMs. It is built for SuperMicro X13SEW-TF and X13SEW-F motherboards that require registered ECC modules. The kit targets server and workstation administrators expanding memory capacity for virtualisation or database workloads.

Suited for compatible SuperMicro servers.

The modules suit IT teams deploying SuperMicro X13SEW platforms that mandate registered ECC memory. Builders using consumer desktop boards, laptops or any system requiring unbuffered non-ECC DIMMs cannot use this kit. Workstations needing lower-capacity sticks or different form factors should look elsewhere.

DDR5 4800 CL40 288-pin RDIMM spec

The memory runs at DDR5 4800 with a CAS latency of 40 and operates at 1.1V. Each module uses a 4Rx4 organisation on a 288-pin registered DIMM. This specification decides whether the kit matches the motherboard qualified-vendor list.

주요 특징

  • 1TB total capacity across 8 matched 128GB modules
  • DDR5 4800 speed rated at PC5-38400 bandwidth
  • ECC registered design detects and corrects data errors
  • CL40 latency at 1.1V operating voltage
  • Validated for SuperMicro X13SEW-TF and X13SEW-F motherboards

사양

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR38400-744K8
Capacity1TB (8 x 128GB)
SpeedDDR5 4800 (PC5 38400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 RDIMM
Rank4Rx4
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content1TB (8X128GB) DDR5 4800MHZ PC5-38400 4Rx4 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory KIT

이 상품에 대한 질문

My SuperMicro X13SEW-TF board has 13 DDR5 slots — do I need to fill all of them for this 1TB kit to run correctly?

The kit contains eight 128GB modules. Populate the eight slots your CPU and manual specify; the board does not require all 13 slots to be filled for the memory to operate.

Can I keep my existing DDR5 4800 CL40 registered ECC DIMMs and add this 4Rx4 kit without timing conflicts?

All modules must share the same 4800 MT/s speed, 1.10 V voltage and CL40 latency. Mixing different rank architectures such as 4Rx4 with other ranks can prevent the system from training at the rated speed.

After installation, how do I confirm the full 1TB is recognised at DDR5 4800 with ECC active?

Enter the BIOS or run a hardware inventory tool such as dmidecode; it should show eight 128GB RDIMMs at 4800 MT/s, 1.10 V, CL40, with ECC and registered status reported for each module.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.