eshinreal
eshinreal 4 Port Mini PCIe to SATA 3 Expansion Card
- Controller Card
25,99 US$
0.00033187BTC
En stock
NEMIX RAM
NEMIX RAM 1TB (8x128GB) DDR5 4800 CL40 ECC RDIMM SuperMicro X13SEW-TF X13SEW-F
1 TB DDR5-4800 ECC registered server kit of eight 128 GB modules at CL40 and 1.1 V for SuperMicro X13SEW motherboards
- Capacity1TB (8 x 128GB)
- SpeedDDR5 4800 (PC5 38400)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 1TB total capacity across 8 matched 128GB modules
- DDR5 4800 speed rated at PC5-38400 bandwidth
- ECC registered design detects and corrects data errors
- CL40 latency at 1.1V operating voltage
- Validated for SuperMicro X13SEW-TF and X13SEW-F motherboards
1TB DDR5 ECC Registered Kit
This kit provides one terabyte of DDR5 memory across eight 128GB registered DIMMs. It is built for SuperMicro X13SEW-TF and X13SEW-F motherboards that require registered ECC modules. The kit targets server and workstation administrators expanding memory capacity for virtualisation or database workloads.
Suited for compatible SuperMicro servers.
The modules suit IT teams deploying SuperMicro X13SEW platforms that mandate registered ECC memory. Builders using consumer desktop boards, laptops or any system requiring unbuffered non-ECC DIMMs cannot use this kit. Workstations needing lower-capacity sticks or different form factors should look elsewhere.
DDR5 4800 CL40 288-pin RDIMM spec
The memory runs at DDR5 4800 with a CAS latency of 40 and operates at 1.1V. Each module uses a 4Rx4 organisation on a 288-pin registered DIMM. This specification decides whether the kit matches the motherboard qualified-vendor list.
Puntos fuertes
- 1TB total capacity across 8 matched 128GB modules
- DDR5 4800 speed rated at PC5-38400 bandwidth
- ECC registered design detects and corrects data errors
- CL40 latency at 1.1V operating voltage
- Validated for SuperMicro X13SEW-TF and X13SEW-F motherboards
Especificaciones
| Brand | NEMIX RAM |
|---|---|
| Series | SuperMicro Server/Workstation Compatible Series Memory |
| Model | SuperMicro DDR5 4800MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR38400-744K8 |
| Capacity | 1TB (8 x 128GB) |
| Speed | DDR5 4800 (PC5 38400) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Supermicro |
| CAS Latency | CL40 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 RDIMM |
| Rank | 4Rx4 |
| Features | DDR5 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 1TB (8X128GB) DDR5 4800MHZ PC5-38400 4Rx4 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory KIT |
Preguntas sobre este artículo
My SuperMicro X13SEW-TF board has 13 DDR5 slots — do I need to fill all of them for this 1TB kit to run correctly?
The kit contains eight 128GB modules. Populate the eight slots your CPU and manual specify; the board does not require all 13 slots to be filled for the memory to operate.
Can I keep my existing DDR5 4800 CL40 registered ECC DIMMs and add this 4Rx4 kit without timing conflicts?
All modules must share the same 4800 MT/s speed, 1.10 V voltage and CL40 latency. Mixing different rank architectures such as 4Rx4 with other ranks can prevent the system from training at the rated speed.
After installation, how do I confirm the full 1TB is recognised at DDR5 4800 with ECC active?
Enter the BIOS or run a hardware inventory tool such as dmidecode; it should show eight 128GB RDIMMs at 4800 MT/s, 1.10 V, CL40, with ECC and registered status reported for each module.
También en este pasillo
Los clientes también compararon
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.
SMUGDESK
SMUGDESK PCIe USB 3.2 Gen 2 Card 10Gbps Type A Type C Type E 19/20Pin
32,99 US$
0.00042126BTC
En stock
Vszerda
Vszerda UC-087-4P 4-port PCIe x1 to 2 USB 3.0 and 2 USB-C expansion card
23,99 US$
0.00030633BTC
En stock
Vszerda
Vszerda UC-087-2P 2 Port PCIe x1 to USB-C Expansion Card with 80/120mm Bracket
21,99 US$
0.0002808BTC
En stock