我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Eight green DDR5 RDIMM modules in anti-static tray

NEMIX RAM

NEMIX RAM 1TB (8x128GB) DDR5 4800 CL40 ECC RDIMM SuperMicro X13SEW-TF X13SEW-F

SKU CH-E5DN-R0D51

1 TB DDR5-4800 ECC registered server kit of eight 128 GB modules at CL40 and 1.1 V for SuperMicro X13SEW motherboards

  • Capacity1TB (8 x 128GB)
  • SpeedDDR5 4800 (PC5 38400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 1TB total capacity across 8 matched 128GB modules
  • DDR5 4800 speed rated at PC5-38400 bandwidth
  • ECC registered design detects and corrects data errors
  • CL40 latency at 1.1V operating voltage
  • Validated for SuperMicro X13SEW-TF and X13SEW-F motherboards

1TB DDR5 ECC Registered Kit

This kit provides one terabyte of DDR5 memory across eight 128GB registered DIMMs. It is built for SuperMicro X13SEW-TF and X13SEW-F motherboards that require registered ECC modules. The kit targets server and workstation administrators expanding memory capacity for virtualisation or database workloads.

Suited for compatible SuperMicro servers.

The modules suit IT teams deploying SuperMicro X13SEW platforms that mandate registered ECC memory. Builders using consumer desktop boards, laptops or any system requiring unbuffered non-ECC DIMMs cannot use this kit. Workstations needing lower-capacity sticks or different form factors should look elsewhere.

DDR5 4800 CL40 288-pin RDIMM spec

The memory runs at DDR5 4800 with a CAS latency of 40 and operates at 1.1V. Each module uses a 4Rx4 organisation on a 288-pin registered DIMM. This specification decides whether the kit matches the motherboard qualified-vendor list.

商品特色

  • 1TB total capacity across 8 matched 128GB modules
  • DDR5 4800 speed rated at PC5-38400 bandwidth
  • ECC registered design detects and corrects data errors
  • CL40 latency at 1.1V operating voltage
  • Validated for SuperMicro X13SEW-TF and X13SEW-F motherboards

商品規格

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR38400-744K8
Capacity1TB (8 x 128GB)
SpeedDDR5 4800 (PC5 38400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 RDIMM
Rank4Rx4
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content1TB (8X128GB) DDR5 4800MHZ PC5-38400 4Rx4 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory KIT

商品問答

My SuperMicro X13SEW-TF board has 13 DDR5 slots — do I need to fill all of them for this 1TB kit to run correctly?

The kit contains eight 128GB modules. Populate the eight slots your CPU and manual specify; the board does not require all 13 slots to be filled for the memory to operate.

Can I keep my existing DDR5 4800 CL40 registered ECC DIMMs and add this 4Rx4 kit without timing conflicts?

All modules must share the same 4800 MT/s speed, 1.10 V voltage and CL40 latency. Mixing different rank architectures such as 4Rx4 with other ranks can prevent the system from training at the rated speed.

After installation, how do I confirm the full 1TB is recognised at DDR5 4800 with ECC active?

Enter the BIOS or run a hardware inventory tool such as dmidecode; it should show eight 128GB RDIMMs at 4800 MT/s, 1.10 V, CL40, with ECC and registered status reported for each module.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。