저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인

NEMIX RAM

NEMIX RAM 32GB (4x8GB) DDR4 3200 ECC UDIMM CL22 1.2V 288-pin memory upgrade

SKU CH-JEW3-0N8XF

32 GB kit of four 8 GB DDR4 ECC UDIMM modules running at 3200 MHz with CL22 latency and 1.2 V for Supermicro X12STE-F and X12STD-F motherboards

  • Capacity32GB (4 x 8GB)
  • Type288-Pin DDR4 ECC UDIMM
  • SpeedDDR4 3200 (PC4 25600)
  • CAS LatencyCL22
  • Voltage1.20V
  • ECCYes
  • ECC protects data integrity by correcting single-bit errors on the fly
  • 32 GB kit (4 × 8 GB) fills four slots for full capacity
  • DDR4-3200 CL22 1.2 V matches the board's rated speed and timing
  • 288-pin unbuffered UDIMM form factor fits Supermicro X12STE-F / X12STD-F exactly
  • Major-brand Samsung, Micron or Hynix chips ensure consistent quality and compatibility

System-specific upgrade kit

This 32GB kit contains four 8GB DDR4 ECC UDIMM modules rated at 3200 MT/s with CL22 latency at 1.2V. It is built for Supermicro X12STE-F and X12STD-F motherboards that require unbuffered ECC memory in a 288-pin DIMM form factor.

Unbuffered ECC construction

Each module uses a 1Rx8 organisation with major-brand DRAM chips and no heat spreader, keeping the profile low for dense server chassis. The 288-pin UDIMM edge connector matches the board slots exactly, so installation follows the motherboard's standard population order without adapters or registered DIMM clearance issues.

DDR4 platform limits

The DDR4 interface tops out at the 3200 MT/s data rate and 1.2V operating point specified here, so the kit cannot exceed that bandwidth on this generation. Buyers who need higher memory density per slot or registered DIMM support for larger capacities will need a platform that moves beyond DDR4 unbuffered ECC.

주요 특징

  • ECC protects data integrity by correcting single-bit errors on the fly
  • 32 GB kit (4 × 8 GB) fills four slots for full capacity
  • DDR4-3200 CL22 1.2 V matches the board's rated speed and timing
  • 288-pin unbuffered UDIMM form factor fits Supermicro X12STE-F / X12STD-F exactly
  • Major-brand Samsung, Micron or Hynix chips ensure consistent quality and compatibility

사양

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR4 ECC Unbuffered UDIMM Memory
Part NumberME25600-818K4
Capacity32GB (4 x 8GB)
Type288-Pin DDR4 ECC UDIMM
SpeedDDR4 3200 (PC4 25600)
CAS LatencyCL22
Voltage1.20V
ECCYes
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR4 ECC Unbuffered UDIMM Motherboard Compatible
Package Content32GB 4X8GB DDR4 3200MHz PC4-25600 1Rx8 1.2V 288-PIN ECC UDIMM KIT

이 모델의 다른 버전

같은 라인업에서 5개 더

같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.

이 상품에 대한 질문

What DDR4 standard and speed does this 32GB kit use?

This kit uses DDR4 3200 (PC4-25600) with CL22 timing and 1.20V voltage.

What physical slot and form factor are required for these modules?

The modules are 288-pin unbuffered ECC UDIMMs; they need standard desktop DIMM slots that accept unbuffered ECC memory.

How should the four 8GB sticks be installed on a Supermicro X12STE-F or X12STD-F board?

Install all four modules following the motherboard manual's population order for 4 DIMMs; a common mistake is skipping the prescribed slot sequence, which can prevent full capacity recognition.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.