我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Four green circuit boards with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM 32GB (4x8GB) DDR4 3200 ECC UDIMM CL22 1.2V 288-pin memory upgrade

SKU CH-JEW3-0N8XF

32 GB kit of four 8 GB DDR4 ECC UDIMM modules running at 3200 MHz with CL22 latency and 1.2 V for Supermicro X12STE-F and X12STD-F motherboards

  • Capacity32GB (4 x 8GB)
  • Type288-Pin DDR4 ECC UDIMM
  • SpeedDDR4 3200 (PC4 25600)
  • CAS LatencyCL22
  • Voltage1.20V
  • ECCYes

Size 32GB 4X8GB

  • ECC protects data integrity by correcting single-bit errors on the fly
  • 32 GB kit (4 × 8 GB) fills four slots for full capacity
  • DDR4-3200 CL22 1.2 V matches the board's rated speed and timing
  • 288-pin unbuffered UDIMM form factor fits Supermicro X12STE-F / X12STD-F exactly
  • Major-brand Samsung, Micron or Hynix chips ensure consistent quality and compatibility

System-specific upgrade kit

This 32GB kit contains four 8GB DDR4 ECC UDIMM modules rated at 3200 MT/s with CL22 latency at 1.2V. It is built for Supermicro X12STE-F and X12STD-F motherboards that require unbuffered ECC memory in a 288-pin DIMM form factor.

Unbuffered ECC construction

Each module uses a 1Rx8 organisation with major-brand DRAM chips and no heat spreader, keeping the profile low for dense server chassis. The 288-pin UDIMM edge connector matches the board slots exactly, so installation follows the motherboard's standard population order without adapters or registered DIMM clearance issues.

DDR4 platform limits

The DDR4 interface tops out at the 3200 MT/s data rate and 1.2V operating point specified here, so the kit cannot exceed that bandwidth on this generation. Buyers who need higher memory density per slot or registered DIMM support for larger capacities will need a platform that moves beyond DDR4 unbuffered ECC.

商品特色

  • ECC protects data integrity by correcting single-bit errors on the fly
  • 32 GB kit (4 × 8 GB) fills four slots for full capacity
  • DDR4-3200 CL22 1.2 V matches the board's rated speed and timing
  • 288-pin unbuffered UDIMM form factor fits Supermicro X12STE-F / X12STD-F exactly
  • Major-brand Samsung, Micron or Hynix chips ensure consistent quality and compatibility

商品規格

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR4 ECC Unbuffered UDIMM Memory
Part NumberME25600-818K4
Capacity32GB (4 x 8GB)
Type288-Pin DDR4 ECC UDIMM
SpeedDDR4 3200 (PC4 25600)
CAS LatencyCL22
Voltage1.20V
ECCYes
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR4 ECC Unbuffered UDIMM Motherboard Compatible
Package Content32GB 4X8GB DDR4 3200MHz PC4-25600 1Rx8 1.2V 288-PIN ECC UDIMM KIT

其他版本

同系列還有 5 款

同系列產品，記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

What DDR4 standard and speed does this 32GB kit use?

This kit uses DDR4 3200 (PC4-25600) with CL22 timing and 1.20V voltage.

What physical slot and form factor are required for these modules?

The modules are 288-pin unbuffered ECC UDIMMs; they need standard desktop DIMM slots that accept unbuffered ECC memory.

How should the four 8GB sticks be installed on a Supermicro X12STE-F or X12STD-F board?

Install all four modules following the motherboard manual's population order for 4 DIMMs; a common mistake is skipping the prescribed slot sequence, which can prevent full capacity recognition.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。