저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인

NEMIX RAM

NEMIX RAM 32GB (4x8GB) DDR5 5600 CL46 1.1V UDIMM Supermicro X13SAQ memory upgrade

SKU CH-N30Y-X0GSX

A 32 GB DDR5 kit of four 8 GB UDIMMs running at 5600 MT/s with CL46 latency and 1.1 V operation, validated for the Supermicro X13SAQ motherboard

  • Capacity32GB (4 x 8GB)
  • Type288-Pin DDR5 UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCNo
  • 32 GB capacity across four 8 GB modules expands multitasking headroom
  • DDR5 5600 speed with CL46 latency delivers rated throughput for Supermicro X13SAQ
  • 10 V operation matches the board's memory-controller specification exactly
  • 1Rx8 unbuffered UDIMM layout fits the required 288-pin slot configuration
  • Built with major OEM chips from Samsung, Micron or Hynix for tested stability

Supermicro X13SAQ DDR5 upgrade

This 32GB kit (4 x 8GB) is built as an exact-match memory upgrade for the Supermicro X13SAQ motherboard. It uses 288-pin DDR5 UDIMM modules that the board's memory controller recognises at full capacity and rated speed.

Verified fitment and tested reliability

The kit matches the board's required 1Rx8 Non-ECC unbuffered layout at 1.10V and CL46 timing. Modules are assembled with major OEM chips from Samsung, Micron or Hynix and tested for stability at DDR5 5600 (PC5 44800) so the system runs at the specified speed without manual tuning.

Builders updating a Supermicro X13SAQ

Suitable for administrators or integrators adding 32GB to a compatible X13SAQ platform using the supported DIMM population order. Not suited for systems that require ECC registered DIMMs, SODIMM form factors, different DDR generations, or capacities beyond what the motherboard manual approves.

주요 특징

  • 32 GB capacity across four 8 GB modules expands multitasking headroom
  • DDR5 5600 speed with CL46 latency delivers rated throughput for Supermicro X13SAQ
  • 10 V operation matches the board's memory-controller specification exactly
  • 1Rx8 unbuffered UDIMM layout fits the required 288-pin slot configuration
  • Built with major OEM chips from Samsung, Micron or Hynix for tested stability

사양

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 Non-ECC Unbuffered UDIMM Memory
Part NumberMD44800-818K4
Capacity32GB (4 x 8GB)
Type288-Pin DDR5 UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content32GB 4X8GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN Non-ECC UDIMM KIT

이 모델의 다른 버전

같은 라인업에서 5개 더

같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.

이 상품에 대한 질문

Will the 288-pin DDR5 modules need any firmware updates or thermal paste replacement over time?

No firmware updates or thermal paste are required; the 1.10 V UDIMM has no heat spreader and runs at its rated 5600 MT/s CL46 for the life of the kit.

What limit appears first when the four 1Rx8 sticks run continuously at 5600 MHz?

The memory controller’s maximum supported capacity and population rules for the Supermicro X13SAQ board are the first constraints you will reach.

How much heat and power draw should I expect from the 32 GB kit at 1.1 V all day?

At 1.1 V the modules draw minimal power and produce low heat; with no spreader they rely on normal case airflow to stay within specification.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.