نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول

NEMIX RAM

NEMIX RAM 32GB (4x8GB) DDR5 5600 CL46 1.1V UDIMM Supermicro X13SAQ memory upgrade

SKU CH-N30Y-X0GSX

A 32 GB DDR5 kit of four 8 GB UDIMMs running at 5600 MT/s with CL46 latency and 1.1 V operation, validated for the Supermicro X13SAQ motherboard

  • Capacity32GB (4 x 8GB)
  • Type288-Pin DDR5 UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCNo
  • 32 GB capacity across four 8 GB modules expands multitasking headroom
  • DDR5 5600 speed with CL46 latency delivers rated throughput for Supermicro X13SAQ
  • 10 V operation matches the board's memory-controller specification exactly
  • 1Rx8 unbuffered UDIMM layout fits the required 288-pin slot configuration
  • Built with major OEM chips from Samsung, Micron or Hynix for tested stability

Supermicro X13SAQ DDR5 upgrade

This 32GB kit (4 x 8GB) is built as an exact-match memory upgrade for the Supermicro X13SAQ motherboard. It uses 288-pin DDR5 UDIMM modules that the board's memory controller recognises at full capacity and rated speed.

Verified fitment and tested reliability

The kit matches the board's required 1Rx8 Non-ECC unbuffered layout at 1.10V and CL46 timing. Modules are assembled with major OEM chips from Samsung, Micron or Hynix and tested for stability at DDR5 5600 (PC5 44800) so the system runs at the specified speed without manual tuning.

Builders updating a Supermicro X13SAQ

Suitable for administrators or integrators adding 32GB to a compatible X13SAQ platform using the supported DIMM population order. Not suited for systems that require ECC registered DIMMs, SODIMM form factors, different DDR generations, or capacities beyond what the motherboard manual approves.

أبرز المميزات

  • 32 GB capacity across four 8 GB modules expands multitasking headroom
  • DDR5 5600 speed with CL46 latency delivers rated throughput for Supermicro X13SAQ
  • 10 V operation matches the board's memory-controller specification exactly
  • 1Rx8 unbuffered UDIMM layout fits the required 288-pin slot configuration
  • Built with major OEM chips from Samsung, Micron or Hynix for tested stability

المواصفات

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 Non-ECC Unbuffered UDIMM Memory
Part NumberMD44800-818K4
Capacity32GB (4 x 8GB)
Type288-Pin DDR5 UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content32GB 4X8GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN Non-ECC UDIMM KIT

إصدارات أخرى من هذا الطراز

5 أخرى من الفئة نفسها

نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.

أسئلة حول هذا المنتج

Will the 288-pin DDR5 modules need any firmware updates or thermal paste replacement over time?

No firmware updates or thermal paste are required; the 1.10 V UDIMM has no heat spreader and runs at its rated 5600 MT/s CL46 for the life of the kit.

What limit appears first when the four 1Rx8 sticks run continuously at 5600 MHz?

The memory controller’s maximum supported capacity and population rules for the Supermicro X13SAQ board are the first constraints you will reach.

How much heat and power draw should I expect from the 32 GB kit at 1.1 V all day?

At 1.1 V the modules draw minimal power and produce low heat; with no spreader they rely on normal case airflow to stay within specification.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.