我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Four green DDR5 UDIMM sticks, black chips, no heat spreader

NEMIX RAM

NEMIX RAM 32GB (4x8GB) DDR5 5600 CL46 1.1V UDIMM Supermicro X13SAQ memory upgrade

SKU CH-N30Y-X0GSX

A 32 GB DDR5 kit of four 8 GB UDIMMs running at 5600 MT/s with CL46 latency and 1.1 V operation, validated for the Supermicro X13SAQ motherboard

  • Capacity32GB (4 x 8GB)
  • Type288-Pin DDR5 UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCNo

Size 32GB 4X8GB

  • 32 GB capacity across four 8 GB modules expands multitasking headroom
  • DDR5 5600 speed with CL46 latency delivers rated throughput for Supermicro X13SAQ
  • 10 V operation matches the board's memory-controller specification exactly
  • 1Rx8 unbuffered UDIMM layout fits the required 288-pin slot configuration
  • Built with major OEM chips from Samsung, Micron or Hynix for tested stability

Supermicro X13SAQ DDR5 upgrade

This 32GB kit (4 x 8GB) is built as an exact-match memory upgrade for the Supermicro X13SAQ motherboard. It uses 288-pin DDR5 UDIMM modules that the board's memory controller recognises at full capacity and rated speed.

Verified fitment and tested reliability

The kit matches the board's required 1Rx8 Non-ECC unbuffered layout at 1.10V and CL46 timing. Modules are assembled with major OEM chips from Samsung, Micron or Hynix and tested for stability at DDR5 5600 (PC5 44800) so the system runs at the specified speed without manual tuning.

Builders updating a Supermicro X13SAQ

Suitable for administrators or integrators adding 32GB to a compatible X13SAQ platform using the supported DIMM population order. Not suited for systems that require ECC registered DIMMs, SODIMM form factors, different DDR generations, or capacities beyond what the motherboard manual approves.

商品特色

  • 32 GB capacity across four 8 GB modules expands multitasking headroom
  • DDR5 5600 speed with CL46 latency delivers rated throughput for Supermicro X13SAQ
  • 10 V operation matches the board's memory-controller specification exactly
  • 1Rx8 unbuffered UDIMM layout fits the required 288-pin slot configuration
  • Built with major OEM chips from Samsung, Micron or Hynix for tested stability

商品規格

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 Non-ECC Unbuffered UDIMM Memory
Part NumberMD44800-818K4
Capacity32GB (4 x 8GB)
Type288-Pin DDR5 UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content32GB 4X8GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN Non-ECC UDIMM KIT

其他版本

同系列還有 5 款

同系列產品，記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

Will the 288-pin DDR5 modules need any firmware updates or thermal paste replacement over time?

No firmware updates or thermal paste are required; the 1.10 V UDIMM has no heat spreader and runs at its rated 5600 MT/s CL46 for the life of the kit.

What limit appears first when the four 1Rx8 sticks run continuously at 5600 MHz?

The memory controller’s maximum supported capacity and population rules for the Supermicro X13SAQ board are the first constraints you will reach.

How much heat and power draw should I expect from the 32 GB kit at 1.1 V all day?

At 1.1 V the modules draw minimal power and produce low heat; with no spreader they rely on normal case airflow to stay within specification.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。