SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
US$391.99
0.00498556BTC
재고 있음
NEMIX RAM
NEMIX RAM 64GB (2x32GB) DDR4 2933 CL21 2Rx8 UDIMM memory upgrade
A 64 GB DDR4 2933 kit (2 × 32 GB, CL21, 1.20 V, 288-pin UDIMM) validated for Supermicro workstations
- Capacity64GB (2 x 32GB)
- SpeedDDR4 2933 (PC4 23400)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 64 GB kit expands workstation memory capacity for heavy workloads
- Dual 32 GB modules populate two slots for balanced channel performance
- DDR4 2933 speed matches Supermicro platform specifications
- CL21 latency at 1.2 V delivers stable operation under load
- 2Rx8 288-pin UDIMM design ensures direct motherboard compatibility
System-specific DDR4 kit
This 64 GB kit contains two 32 GB DDR4 UDIMMs rated at 2933 MT/s with CL21 latency. It is built for Supermicro workstations such as the SuperWorkstation 5039AD-I and the C9X299-PGF motherboard, delivering a straightforward capacity upgrade for supported platforms.
DDR4 2933 interface limits
The modules run at the standard 1.20 V and use the 288-pin DDR4 UDIMM form factor, so they only fit boards wired for DDR4. Speed is fixed at PC4-23400 with 2Rx8 organisation, and the lack of ECC or registered buffers means they cannot be used in systems that require error-correcting or registered memory.
Unbuffered modules without spreaders
Each stick is an unbuffered UDIMM without a heat spreader, keeping the profile low for tight server or workstation chassis. The 288-pin edge connector aligns with standard DDR4 slots, and the kit is validated for the listed Supermicro models to ensure stable operation in those configurations.
주요 특징
- 64 GB kit expands workstation memory capacity for heavy workloads
- Dual 32 GB modules populate two slots for balanced channel performance
- DDR4 2933 speed matches Supermicro platform specifications
- CL21 latency at 1.2 V delivers stable operation under load
- 2Rx8 288-pin UDIMM design ensures direct motherboard compatibility
사양
| Brand | NEMIX RAM |
|---|---|
| Series | SuperMicro Server/Workstation Compatible Series Memory |
| Model | SuperMicro DDR4 2933MHZ Non-ECC Unbuffered UDIMM |
| Part Number | MD23400-328K2 |
| Capacity | 64GB (2 x 32GB) |
| Speed | DDR4 2933 (PC4 23400) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | Supermicro |
| CAS Latency | CL21 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 UDIMM |
| Rank | 2Rx8 |
| Features | DDR4 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 64GB (2X32GB) DDR4 2933MHZ PC4-23400 2Rx8 1.2V CL21 288-PIN NON-ECC Unbuffered UDIMM KIT |
이 상품에 대한 질문
Should I choose the 64GB kit or look for a single 32GB module for my SuperMicro system?
The kit provides two matched 32GB modules for dual-channel operation; a single module would run in single-channel mode and reduce memory bandwidth.
What does the 2933 MT/s rating mean once the modules are installed in my SuperMicro workstation?
The memory will run at up to 2933 MT/s if the CPU and motherboard support that speed; otherwise it will downclock to the highest speed the platform allows.
Is the 288-pin DDR4 UDIMM interface compatible with standard desktop motherboards or only SuperMicro server boards?
The 288-pin DDR4 UDIMM form factor fits any desktop or workstation board with DDR4 UDIMM slots, but this kit is validated for the listed SuperMicro systems.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
