SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
US$391.99
0.0050133BTC
재고 있음
NEMIX RAM
NEMIX RAM 768GB 6x128GB DDR5-6400 ECC RDIMM CL52 1.1V 2Rx4 Supermicro H14DST-F memory upgrade
Six 128 GB DDR5-6400 ECC registered DIMMs totalling 768 GB at 1.1 V CL52, validated for the Supermicro H14DST-F motherboard
- Capacity768GB (6 x 128GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 768 GB total capacity from six 128 GB modules for maximum memory density
- DDR5-6400 speed with CL52 latency delivers rated bandwidth for server workloads
- Registered ECC architecture corrects single-bit errors and offloads the memory controller
- 1 V operating voltage matches the motherboard's electrical specification exactly
- Validated for the Supermicro H14DST-F with 288-pin RDIMM form factor
Exact-match kit for Supermicro H14DST-F
This 768 GB kit contains six 128 GB DDR5-6400 RDIMMs built to the 2Rx4 registered ECC specification the H14DST-F memory controller expects. It runs at 1.1 V with CL52 latency so the server recognises full capacity and rated speed immediately.
Suited for fully populating the H14DST-F
Administrators expanding a Supermicro H14DST-F to its maximum supported memory will use this kit. Builders who need unbuffered UDIMMs, SODIMM form factor, lower capacities or non-ECC modules should look elsewhere because this product is registered ECC RDIMM only.
Straightforward installation with manual checks
The 288-pin RDIMMs seat in the standard DDR5 slots, but the board's population order and per-channel limits must be followed exactly. Skipping the manual's DIMM sequence is the most common cause of modules not being detected or running at reduced speed.
주요 특징
- 768 GB total capacity from six 128 GB modules for maximum memory density
- DDR5-6400 speed with CL52 latency delivers rated bandwidth for server workloads
- Registered ECC architecture corrects single-bit errors and offloads the memory controller
- 1 V operating voltage matches the motherboard's electrical specification exactly
- Validated for the Supermicro H14DST-F with 288-pin RDIMM form factor
사양
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-724K6 |
| Capacity | 768GB (6 x 128GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 768GB 6X128GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
이 상품에 대한 질문
What motherboard must I already own for this 6x128GB DDR5-6400 ECC RDIMM kit to work?
This kit is verified for the Supermicro H14DST-F motherboard; it requires that board's 288-pin RDIMM slots and registered-DIMM memory controller.
Will these 2Rx4 registered ECC modules run alongside any existing RDIMMs I keep in the H14DST-F?
The H14DST-F's memory population rules determine mixed-rank support; install this 768GB kit in the approved slot order from the board manual and do not mix with UDIMMs or SODIMMs.
After installation, how do I confirm the kit is running at its rated DDR5-6400 CL52 1.1V settings?
Enter the system BIOS or UEFI and check that total capacity reads 768GB, data rate shows 6400 MT/s, CAS latency reads 52, voltage reads 1.1V, and ECC status is enabled.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
