我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Six bare green DDR5 RDIMM sticks in a row

NEMIX RAM

NEMIX RAM 768GB 6x128GB DDR5-6400 ECC RDIMM CL52 1.1V 2Rx4 Supermicro H14DST-F memory upgrade

SKU CH-VYF0-YHVP7

Six 128 GB DDR5-6400 ECC registered DIMMs totalling 768 GB at 1.1 V CL52, validated for the Supermicro H14DST-F motherboard

  • Capacity768GB (6 x 128GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes
  • 768 GB total capacity from six 128 GB modules for maximum memory density
  • DDR5-6400 speed with CL52 latency delivers rated bandwidth for server workloads
  • Registered ECC architecture corrects single-bit errors and offloads the memory controller
  • 1 V operating voltage matches the motherboard's electrical specification exactly
  • Validated for the Supermicro H14DST-F with 288-pin RDIMM form factor

Exact-match kit for Supermicro H14DST-F

This 768 GB kit contains six 128 GB DDR5-6400 RDIMMs built to the 2Rx4 registered ECC specification the H14DST-F memory controller expects. It runs at 1.1 V with CL52 latency so the server recognises full capacity and rated speed immediately.

Suited for fully populating the H14DST-F

Administrators expanding a Supermicro H14DST-F to its maximum supported memory will use this kit. Builders who need unbuffered UDIMMs, SODIMM form factor, lower capacities or non-ECC modules should look elsewhere because this product is registered ECC RDIMM only.

Straightforward installation with manual checks

The 288-pin RDIMMs seat in the standard DDR5 slots, but the board's population order and per-channel limits must be followed exactly. Skipping the manual's DIMM sequence is the most common cause of modules not being detected or running at reduced speed.

商品特色

  • 768 GB total capacity from six 128 GB modules for maximum memory density
  • DDR5-6400 speed with CL52 latency delivers rated bandwidth for server workloads
  • Registered ECC architecture corrects single-bit errors and offloads the memory controller
  • 1 V operating voltage matches the motherboard's electrical specification exactly
  • Validated for the Supermicro H14DST-F with 288-pin RDIMM form factor

商品規格

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-724K6
Capacity768GB (6 x 128GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content768GB 6X128GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT

商品問答

What motherboard must I already own for this 6x128GB DDR5-6400 ECC RDIMM kit to work?

This kit is verified for the Supermicro H14DST-F motherboard; it requires that board's 288-pin RDIMM slots and registered-DIMM memory controller.

Will these 2Rx4 registered ECC modules run alongside any existing RDIMMs I keep in the H14DST-F?

The H14DST-F's memory population rules determine mixed-rank support; install this 768GB kit in the approved slot order from the board manual and do not mix with UDIMMs or SODIMMs.

After installation, how do I confirm the kit is running at its rated DDR5-6400 CL52 1.1V settings?

Enter the system BIOS or UEFI and check that total capacity reads 768GB, data rate shows 6400 MT/s, CAS latency reads 52, voltage reads 1.1V, and ECC status is enabled.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。