저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인

NEMIX RAM

NEMIX RAM 96GB 6x16GB DDR5 5600MHz CL46 1Rx8 1.1V ECC Registered RDIMM memory upgrade for Supermicro H14SST-G

SKU CH-XXPB-Y0S7G

A 96GB kit of six 16GB DDR5-5600 CL46 1.1V ECC registered RDIMM modules built for the Supermicro H14SST-G motherboard

  • Capacity96GB (6 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes
  • 96 GB total capacity from six 16 GB modules for high-density server workloads
  • DDR5 5600 speed with CL46 latency delivers rated throughput for Supermicro H14SST-G
  • Registered ECC architecture offloads the memory controller and corrects single-bit errors on the fly
  • 1 V operation at 1Rx8 rank matches the board's memory-controller requirements exactly
  • 288-pin RDIMM form factor fits the Supermicro H14SST-G motherboard slots precisely

Capacity and configuration

This NEMIX RAM kit provides 96GB of DDR5 memory across six 16GB RDIMMs. Each module is a single-rank 1Rx8 part running at 5600MHz with CL46 latency at 1.1V. The registered ECC design matches the Supermicro H14SST-G motherboard requirements for full-capacity operation.

Suited workloads and limits

The kit targets servers and workstations that need registered ECC memory for data integrity and maximum slot population. It is not for systems that accept only unbuffered UDIMMs or SO-DIMMs, nor for platforms that cannot run registered DIMMs at the rated speed.

Pre-installation checks

Verify the motherboard manual for approved DIMM population order and maximum supported capacity per slot. Confirm the BIOS version supports this memory configuration and that all six slots are available for the registered RDIMM form factor.

주요 특징

  • 96 GB total capacity from six 16 GB modules for high-density server workloads
  • DDR5 5600 speed with CL46 latency delivers rated throughput for Supermicro H14SST-G
  • Registered ECC architecture offloads the memory controller and corrects single-bit errors on the fly
  • 1 V operation at 1Rx8 rank matches the board's memory-controller requirements exactly
  • 288-pin RDIMM form factor fits the Supermicro H14SST-G motherboard slots precisely

사양

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-618K6
Capacity96GB (6 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content96GB 6X16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN ECC RDIMM KIT

이 상품에 대한 질문

Does the Supermicro H14SST-G need all six DIMM slots filled for this 96 GB kit to run at DDR5 5600?

The board requires 288-pin RDIMMs and follows its own population rules; installing all six 16 GB modules matches the kit's validated configuration for full-speed operation.

Can I mix these 1Rx8 CL46 registered ECC modules with other DDR5 RDIMMs of different rank or latency?

Mixing ranks, latencies or voltages is not recommended; the motherboard manual specifies approved population order and identical modules ensure stable operation at 5600 MT/s.

How do I confirm the kit is running at 5600 MT/s with ECC active after installation?

Check the BIOS memory information screen or use a tool like dmidecode to verify speed shows 5600 MT/s, capacity reads 96 GB and ECC status reports enabled.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.