我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Six green DDR5 RDIMM modules with black chips, no heat spreaders

NEMIX RAM

NEMIX RAM 96GB 6x16GB DDR5 5600MHz CL46 1Rx8 1.1V ECC Registered RDIMM memory upgrade for Supermicro H14SST-G

SKU CH-XXPB-Y0S7G

A 96GB kit of six 16GB DDR5-5600 CL46 1.1V ECC registered RDIMM modules built for the Supermicro H14SST-G motherboard

  • Capacity96GB (6 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes
  • 96 GB total capacity from six 16 GB modules for high-density server workloads
  • DDR5 5600 speed with CL46 latency delivers rated throughput for Supermicro H14SST-G
  • Registered ECC architecture offloads the memory controller and corrects single-bit errors on the fly
  • 1 V operation at 1Rx8 rank matches the board's memory-controller requirements exactly
  • 288-pin RDIMM form factor fits the Supermicro H14SST-G motherboard slots precisely

Capacity and configuration

This NEMIX RAM kit provides 96GB of DDR5 memory across six 16GB RDIMMs. Each module is a single-rank 1Rx8 part running at 5600MHz with CL46 latency at 1.1V. The registered ECC design matches the Supermicro H14SST-G motherboard requirements for full-capacity operation.

Suited workloads and limits

The kit targets servers and workstations that need registered ECC memory for data integrity and maximum slot population. It is not for systems that accept only unbuffered UDIMMs or SO-DIMMs, nor for platforms that cannot run registered DIMMs at the rated speed.

Pre-installation checks

Verify the motherboard manual for approved DIMM population order and maximum supported capacity per slot. Confirm the BIOS version supports this memory configuration and that all six slots are available for the registered RDIMM form factor.

商品特色

  • 96 GB total capacity from six 16 GB modules for high-density server workloads
  • DDR5 5600 speed with CL46 latency delivers rated throughput for Supermicro H14SST-G
  • Registered ECC architecture offloads the memory controller and corrects single-bit errors on the fly
  • 1 V operation at 1Rx8 rank matches the board's memory-controller requirements exactly
  • 288-pin RDIMM form factor fits the Supermicro H14SST-G motherboard slots precisely

商品規格

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-618K6
Capacity96GB (6 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content96GB 6X16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN ECC RDIMM KIT

商品問答

Does the Supermicro H14SST-G need all six DIMM slots filled for this 96 GB kit to run at DDR5 5600?

The board requires 288-pin RDIMMs and follows its own population rules; installing all six 16 GB modules matches the kit's validated configuration for full-speed operation.

Can I mix these 1Rx8 CL46 registered ECC modules with other DDR5 RDIMMs of different rank or latency?

Mixing ranks, latencies or voltages is not recommended; the motherboard manual specifies approved population order and identical modules ensure stable operation at 5600 MT/s.

How do I confirm the kit is running at 5600 MT/s with ECC active after installation?

Check the BIOS memory information screen or use a tool like dmidecode to verify speed shows 5600 MT/s, capacity reads 96 GB and ECC status reports enabled.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。