Zyvpee DBTB0838B2S 80mm case fan 12V 2.1A 4-wire 7000 RPM 80 CFM 50 dBA 80x76mm
- Case Fan
- Case
OEM Industries
A 60 mm ball-bearing fan spinning at 4000-4499 rpm delivers 20-25 cfm airflow at 20-25 dBA over a 3-pin connector
The OEM Industries 2410RL-04W-S19 is a 60 mm, 3-pin cooling fan designed for compact CPU air coolers or case ventilation. It suits builders maintaining legacy systems, small-form-factor chassis or industrial equipment where a low-profile, ball-bearing fan is required.
At 4000–4499 rpm the fan delivers 20–25 cfm of airflow while producing 20–25 dBA of noise. This output is adequate for low-TDP processors or auxiliary airflow, but it runs out quickly on modern mid-range or high-end CPUs that demand higher static pressure or greater volume.
The unit replaces worn or noisy 60 mm 3-pin fans in existing coolers or enclosures. The jump is worthwhile when the original sleeve-bearing fan has failed or become audible; it is not a substitute for a larger heatsink assembly or a PWM-controlled cooler on current platforms.
| Model | 2410RL-04W-S19 |
|---|---|
| Color | Black |
| Type | Fan only |
| Fan Size | 60mm |
| Bearing Type | Ball |
| Power Connector | 3 Pin |
| LED | No |
The unit is a 60mm square frame with standard 60mm mounting centres, so it aligns with the four screw holes used by most 60mm coolers and cases.
Connect the 3-pin header to a motherboard fan header and monitor RPM in BIOS or a hardware utility; the fan should report between 4000 and 4499 rpm under load.
The package contains only the fan unit itself; mounting screws and any adapter cables are not included and must be sourced separately.
이 진열대의 다른 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
결제할 코인과 가격을 확인할 통화입니다.
체크아웃 시 지갑에서 전송됩니다.
표시 전용 — 카탈로그 가격은 달러 기준입니다.
일치하는 통화가 없습니다.
사이트에서 사용할 언어를 선택하십시오.
처음 방문하셨나요?
이미 계정이 있으신가요?
자동 재설정 기능은 없습니다. 이 쇼핑몰은 어떠한 메일도 보내지 않으므로 요청할 일회용 링크 자체가 없습니다. 계정에 등록된 이메일 주소를 그대로 두시면 담당자가 직접 확인해 처리합니다.
요청 접수
받은편지함으로 오는 것은 아무것도 없습니다 — 이 쇼핑몰은 메일을 전혀 보내지 않습니다. 담당자가 직접 확인해 처리합니다.
기억나셨나요?