暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black 60mm cooling fan with three-pin connector

OEM Industries

OEM Industries 2410RL-04W-S19 60mm 3-pin CPU cooler

SKU CH-7461-82AN3

A 60 mm ball-bearing fan spinning at 4000-4499 rpm delivers 20-25 cfm airflow at 20-25 dBA over a 3-pin connector

  • ColorBlack
  • TypeFan only
  • Fan Size60mm
  • Bearing TypeBall
  • Power Connector3 Pin
  • LEDNo
  • Efficient cooling with 20 to 25 CFM airflow
  • Quiet operation at 20 to 25 dBA noise level
  • Reliable ball bearing for long service life
  • Standard 3-pin connector fits common headers
  • Compact 60 mm size suits tight builds

Product Identity

The OEM Industries 2410RL-04W-S19 is a 60 mm, 3-pin cooling fan designed for compact CPU air coolers or case ventilation. It suits builders maintaining legacy systems, small-form-factor chassis or industrial equipment where a low-profile, ball-bearing fan is required.

Capacity and Headroom

At 4000–4499 rpm the fan delivers 20–25 cfm of airflow while producing 20–25 dBA of noise. This output is adequate for low-TDP processors or auxiliary airflow, but it runs out quickly on modern mid-range or high-end CPUs that demand higher static pressure or greater volume.

Upgrade Context

The unit replaces worn or noisy 60 mm 3-pin fans in existing coolers or enclosures. The jump is worthwhile when the original sleeve-bearing fan has failed or become audible; it is not a substitute for a larger heatsink assembly or a PWM-controlled cooler on current platforms.

特長

  • Efficient cooling with 20 to 25 CFM airflow
  • Quiet operation at 20 to 25 dBA noise level
  • Reliable ball bearing for long service life
  • Standard 3-pin connector fits common headers
  • Compact 60 mm size suits tight builds

仕様

Model2410RL-04W-S19
ColorBlack
TypeFan only
Fan Size60mm
Bearing TypeBall
Power Connector3 Pin
LEDNo

この商品に関する質問

Will the 60mm 3-pin fan fit the same mounting holes as my existing 60mm cooler?

The unit is a 60mm square frame with standard 60mm mounting centres, so it aligns with the four screw holes used by most 60mm coolers and cases.

How can I confirm the 2410RL-04W-S19 is spinning at the rated speed after installation?

Connect the 3-pin header to a motherboard fan header and monitor RPM in BIOS or a hardware utility; the fan should report between 4000 and 4499 rpm under load.

Does the box include mounting screws or a 3-pin to 4-pin adapter, or must I buy them separately?

The package contains only the fan unit itself; mounting screws and any adapter cables are not included and must be sourced separately.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。