OEM Industries
OEM Industries 2410RL-04W-S19 60mm 3-pin CPU cooler
A 60 mm ball-bearing fan spinning at 4000-4499 rpm delivers 20-25 cfm airflow at 20-25 dBA over a 3-pin connector
- ColorBlack
- TypeFan only
- Fan Size60mm
- Bearing TypeBall
- Power Connector3 Pin
- LEDNo
- Efficient cooling with 20 to 25 CFM airflow
- Quiet operation at 20 to 25 dBA noise level
- Reliable ball bearing for long service life
- Standard 3-pin connector fits common headers
- Compact 60 mm size suits tight builds
Product Identity
The OEM Industries 2410RL-04W-S19 is a 60 mm, 3-pin cooling fan designed for compact CPU air coolers or case ventilation. It suits builders maintaining legacy systems, small-form-factor chassis or industrial equipment where a low-profile, ball-bearing fan is required.
Capacity and Headroom
At 4000–4499 rpm the fan delivers 20–25 cfm of airflow while producing 20–25 dBA of noise. This output is adequate for low-TDP processors or auxiliary airflow, but it runs out quickly on modern mid-range or high-end CPUs that demand higher static pressure or greater volume.
Upgrade Context
The unit replaces worn or noisy 60 mm 3-pin fans in existing coolers or enclosures. The jump is worthwhile when the original sleeve-bearing fan has failed or become audible; it is not a substitute for a larger heatsink assembly or a PWM-controlled cooler on current platforms.
จุดเด่น
- Efficient cooling with 20 to 25 CFM airflow
- Quiet operation at 20 to 25 dBA noise level
- Reliable ball bearing for long service life
- Standard 3-pin connector fits common headers
- Compact 60 mm size suits tight builds
ข้อมูลจำเพาะ
| Model | 2410RL-04W-S19 |
|---|---|
| Color | Black |
| Type | Fan only |
| Fan Size | 60mm |
| Bearing Type | Ball |
| Power Connector | 3 Pin |
| LED | No |
คำถามเกี่ยวกับสินค้านี้
Will the 60mm 3-pin fan fit the same mounting holes as my existing 60mm cooler?
The unit is a 60mm square frame with standard 60mm mounting centres, so it aligns with the four screw holes used by most 60mm coolers and cases.
How can I confirm the 2410RL-04W-S19 is spinning at the rated speed after installation?
Connect the 3-pin header to a motherboard fan header and monitor RPM in BIOS or a hardware utility; the fan should report between 4000 and 4499 rpm under load.
Does the box include mounting screws or a 3-pin to 4-pin adapter, or must I buy them separately?
The package contains only the fan unit itself; mounting screws and any adapter cables are not included and must be sourced separately.
อื่น ๆ ในหมวดนี้
ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear



