저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Black square 70mm maglev fan only no LED

OEM Industries

OEM Industries GM1207PKVX-A 70mm Maglev CPU cooler

SKU CH-FGBN-KB6B6

A 70 mm maglev fan cooler delivering 12 V, 2.5 W airflow for compact CPU or case cooling

  • ColorBlack
  • TypeFan only
  • Fan Size70mm
  • Bearing TypeMaglev
  • Power Connector3 Pin
  • LEDNo
  • 70 mm Maglev bearing delivers quiet, long-life airflow
  • 12 V 2.5 W rating keeps power draw low
  • 3-pin connector enables direct motherboard speed control
  • Square 70×20 mm frame fits tight projector-style cases
  • Black finish matches stealth builds without LED distraction

70 mm Maglev CPU Cooler

The OEM Industries GM1207PKVX-A is a square 70 mm fan unit with Maglev bearing technology. It draws 2.5 W at 12 V and connects via a standard 3-pin power header. The black frame measures 7020 format and suits compact chassis or projector-style builds.

Upgrade from Sleeve Bearing Fans

This cooler replaces older 70 mm sleeve or ball-bearing fans that develop noise or vibration over time. The Maglev design reduces friction, extending service life in always-on systems. The jump is worth it when acoustic consistency matters more than raw airflow in tight enclosures.

Check 3-Pin Header and Clearance

Verify the motherboard or fan controller provides a 3-pin connector; PWM control is not supported on this model. Confirm 70 mm mounting holes and 20 mm depth fit within the case or heatsink assembly. Ensure 12 V supply matches the unit's rated input.

주요 특징

  • 70 mm Maglev bearing delivers quiet, long-life airflow
  • 12 V 2.5 W rating keeps power draw low
  • 3-pin connector enables direct motherboard speed control
  • Square 70×20 mm frame fits tight projector-style cases
  • Black finish matches stealth builds without LED distraction

사양

ModelGM1207PKVX-A
ColorBlack
TypeFan only
Fan Size70mm
Bearing TypeMaglev
Power Connector3 Pin
LEDNo

이 상품에 대한 질문

What are the exact dimensions of the square cooler so I can verify case clearance?

The cooler measures 70 mm by 70 mm with a 20 mm thickness, matching the SUNON 7020 form factor.

How do I connect the three-pin power connector and what is the common wiring mistake?

Align the three-pin plug with the motherboard fan header, matching the keyed tab; the mistake is forcing it on offset by one pin, which leaves the tachometer wire unconnected.

When should I plan to replace the maglev fan in this 12 V 2.5 W cooler?

Maglev bearings eliminate contact wear, so replacement is only needed if the rotor becomes unbalanced or the motor fails, which typically occurs after many years of continuous operation.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.