我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Black square 70mm maglev fan only no LED

OEM Industries

OEM Industries GM1207PKVX-A 70mm Maglev CPU cooler

SKU CH-FGBN-KB6B6

A 70 mm maglev fan cooler delivering 12 V, 2.5 W airflow for compact CPU or case cooling

  • ColorBlack
  • TypeFan only
  • Fan Size70mm
  • Bearing TypeMaglev
  • Power Connector3 Pin
  • LEDNo
  • 70 mm Maglev bearing delivers quiet, long-life airflow
  • 12 V 2.5 W rating keeps power draw low
  • 3-pin connector enables direct motherboard speed control
  • Square 70×20 mm frame fits tight projector-style cases
  • Black finish matches stealth builds without LED distraction

70 mm Maglev CPU Cooler

The OEM Industries GM1207PKVX-A is a square 70 mm fan unit with Maglev bearing technology. It draws 2.5 W at 12 V and connects via a standard 3-pin power header. The black frame measures 7020 format and suits compact chassis or projector-style builds.

Upgrade from Sleeve Bearing Fans

This cooler replaces older 70 mm sleeve or ball-bearing fans that develop noise or vibration over time. The Maglev design reduces friction, extending service life in always-on systems. The jump is worth it when acoustic consistency matters more than raw airflow in tight enclosures.

Check 3-Pin Header and Clearance

Verify the motherboard or fan controller provides a 3-pin connector; PWM control is not supported on this model. Confirm 70 mm mounting holes and 20 mm depth fit within the case or heatsink assembly. Ensure 12 V supply matches the unit's rated input.

商品特色

  • 70 mm Maglev bearing delivers quiet, long-life airflow
  • 12 V 2.5 W rating keeps power draw low
  • 3-pin connector enables direct motherboard speed control
  • Square 70×20 mm frame fits tight projector-style cases
  • Black finish matches stealth builds without LED distraction

商品規格

ModelGM1207PKVX-A
ColorBlack
TypeFan only
Fan Size70mm
Bearing TypeMaglev
Power Connector3 Pin
LEDNo

商品問答

What are the exact dimensions of the square cooler so I can verify case clearance?

The cooler measures 70 mm by 70 mm with a 20 mm thickness, matching the SUNON 7020 form factor.

How do I connect the three-pin power connector and what is the common wiring mistake?

Align the three-pin plug with the motherboard fan header, matching the keyed tab; the mistake is forcing it on offset by one pin, which leaves the tachometer wire unconnected.

When should I plan to replace the maglev fan in this 12 V 2.5 W cooler?

Maglev bearings eliminate contact wear, so replacement is only needed if the rotor becomes unbalanced or the motor fails, which typically occurs after many years of continuous operation.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。