저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Small black 50mm Maglev fan with three power wires

OEM Industries

OEM Industries ME50151V3-D030-G99 50mm Maglev Fan

SKU CH-NKBE-ZYEEB

A 50 mm maglev fan delivering 3500 to 3999 rpm airflow at 10 to 15 dBA noise

  • ColorBlack
  • TypeFan only
  • Fan Size50mm
  • Bearing TypeMaglev
  • Power Connector3 Pin
  • LEDNo
  • Maglev bearing reduces friction for longer life
  • 3500–3999 RPM delivers 10–15 CFM airflow
  • Low 10–15 dBA noise keeps systems quiet
  • 3-pin 12 V connector fits standard headers
  • Compact 50 mm frame suits tight cases

50mm Maglev Case Fan

The OEM Industries ME50151V3-D030-G99 is a 50mm fan built with a magnetic-levitation bearing for quiet, low-vibration operation. It targets builders refreshing compact chassis or small-form-factor coolers that accept a 50mm frame and a three-pin power connector.

Airflow Range 10 to 15 CFM

At 3500 to 3999 rpm the fan moves between 10 and 15 cubic feet per minute, enough for targeted spot-cooling on voltage regulators, chipset heatsinks or tight drive bays. It runs out of steam when asked to cool a full-size CPU tower or exhaust a high-wattage graphics card.

Noise Floor 10 to 15 dBA

The magnetic bearing keeps acoustic output between 10 and 15 dBA across the speed range, making it suitable for noise-sensitive builds. Buyers who need higher static pressure or PWM speed control should look elsewhere.

주요 특징

  • Maglev bearing reduces friction for longer life
  • 3500–3999 RPM delivers 10–15 CFM airflow
  • Low 10–15 dBA noise keeps systems quiet
  • 3-pin 12 V connector fits standard headers
  • Compact 50 mm frame suits tight cases

사양

ModelME50151V3-D030-G99
ColorBlack
TypeFan only
Fan Size50mm
Bearing TypeMaglev
Power Connector3 Pin
LEDNo

이 상품에 대한 질문

Will the 3-pin power connector on this 50mm maglev fan work with the 4-pin headers on my older motherboard?

The fan uses a standard 3-pin connector that fits 4-pin motherboard headers; it will run at full speed because the PWM pin is absent.

How can I confirm the fan is running within its 3500 to 3999 rpm range once installed?

Check the RPM reading in BIOS or a hardware monitoring utility; it should report a value between 3500 and 3999 rpm under load.

Does the package include mounting screws or do I need to buy them separately for a 50mm case mount?

The product is listed as fan only; mounting screws are not included and must be sourced separately.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.