PUSKILL
PUSKILL KILLBLADE DDR4 32GB (2x16GB) 3200MHz CL16 desktop RAM
A 32GB dual-channel DDR4 kit running at 3200MHz with CL16 timings and 1.35V for Intel XMP 2.0 and AMD Ryzen desktops
- CAS LatencyCL16
- Voltage1.35V
- Multi-channel KitDual Channel Kit
- Timing11-11-11-36
- ChipsetSamsung, Hynix, Micron
- Capacity32GB
Option 2x16GB 3200MHz CL16 1.35V
- 2x16GB 3200MHz CL16 1.35V
- 2x16GB 2666MHz CL19 1.2V
- Smoother multitasking with 3200MHz DDR4 speed
- Responsive gaming from tight CL16-18-18-42 timings
- 32GB dual-channel kit handles heavy workloads
- Intel XMP 2.0 profile enables rated speed instantly
- Low 1.35V voltage reduces power draw
32GB Dual-Channel Kit
This 32GB kit contains two 16GB modules for dual-channel operation on desktop systems. It targets users who need extra headroom for gaming, streaming or content creation workloads. The kit runs at DDR4 3200 with tested CL16 timings and a 1.35V operating voltage.
DDR4 3200 Interface Limits
The DDR4 3200 standard caps transfer rates at 3200 MT/s and PC4-25600 bandwidth. The kit uses Intel XMP 2.0 profiles to reach the rated speed automatically on supported platforms. AMD Ryzen systems can also run the memory at the same frequency with manual BIOS configuration. Tighter timings than CL16-18-18-42 are not guaranteed by the profile.
Capacity Headroom For Multitasking
The 32GB capacity handles modern games, video editing timelines and 3D rendering scenes without hitting the swap file. Heavy multitasking across multiple virtual machines or large dataset processing may still exhaust the available memory. The registered design and lack of ECC limit use to consumer desktop boards that accept registered unbuffered modules.
주요 특징
- Smoother multitasking with 3200MHz DDR4 speed
- Responsive gaming from tight CL16-18-18-42 timings
- 32GB dual-channel kit handles heavy workloads
- Intel XMP 2.0 profile enables rated speed instantly
- Low 1.35V voltage reduces power draw
사양
| CAS Latency | CL16 |
|---|---|
| Voltage | 1.35V |
| Multi-channel Kit | Dual Channel Kit |
| Timing | 11-11-11-36 |
| Chipset | Samsung, Hynix, Micron |
| Capacity | 32GB |
| Speed | DDR4 3200 (PC4 25600) |
| Recommend Use | AMD & Intel Compatible |
| tRAC | 30ns |
| ECC | No |
| Buffered/Registered | Registered |
| Heat Spreader | No |
| Type | 288-Pin PC RAM |
| Tested Frequency | 3200 MHz |
| Tested Timing | CL16 |
| BIOS/Performance Profile | Intel XMP 2.0 only |
| Color | Black |
| LED Color | None |
| Brand | PUSKILL |
| Series | KILLBLADE |
| Model | DDR4 |
이 모델의 다른 버전
같은 라인업에서 1개 더
같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.
이 상품에 대한 질문
Will the kit run at 3200 MHz automatically on a Ryzen motherboard?
The modules carry an Intel XMP 2.0 profile; on Ryzen you enable the equivalent DOCP or EXPO setting in BIOS to reach the rated speed.
Does the 1.35 V rating require a motherboard that supports voltages above the standard 1.35 V?
No, 1.35 V is within the normal DDR4 range and works on any board that accepts DDR4 memory.
Is the memory unbuffered or registered, and does that affect consumer desktop use?
The spec lists the kit as registered, which is intended for server platforms; most consumer desktop motherboards require unbuffered DIMMs and will not post with registered modules.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
EN-Labs 11-001-366 PCIe x4 USB 3.2 10Gbps 5-port card
- no
- 12CM Case fan,screw…
Wadermoon PCI-E 1X to 4 PCI-E USB 3.0 expansion card
- PCI Express to USB…
- 4 Port
Orico PE20-1C 20 Gbps USB 3.2 Gen 2x2 Type-C PCIe x4 expansion card
- PCI Express to USB…
- 1x USB Port
OWC 16GB DDR4 2666MHz CL19 ECC SODIMM 1.2V laptop RAM
- 16GB (1 x 16GB)
- 260-Pin DDR4 SO-DIMM




