저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Rectangular E1.S 9.5mm enterprise SSD with green circuit board and silver label

Solidigm

Solidigm D7-P5520 7.68TB E1.S 9.5mm enterprise SSD (SSDPFUKX076T1N1)

SKU CH-3QSN-QVNVN MPN SSDPFUKX076T1N1

7.68 TB E1.S 9.5 mm enterprise SSD with PCIe 4.0 x4 and 144-layer TLC 3D NAND

  • Form FactorE1.S 9.5mm
  • Capacity7.68TB
  • Memory Components144L TLC 3D NAND
  • InterfacePCI-Express 4.0
  • MTBF2,000,000 hours
  • Max Shock Resistance1,000 G (Max) at 0.5 msec

Options 7.68TB, E1.S 9.5mm, Non-OPAL

구성 2개 더 보기
  • High capacity supports dense server workloads with 7.68TB storage
  • PCIe 4.0 interface enables fast data transfer for enterprise applications
  • 144-layer TLC 3D NAND delivers reliable endurance in data-centre environments
  • 2,000,000-hour MTBF ensures long-term operational stability
  • E1.S 9.5mm form factor fits compact high-density server chassis

Server storage density

The Solidigm D7-P5520 delivers 7.68TB in an E1.S 9.5mm form factor built for dense server deployments. Its 144L TLC 3D NAND and PCI-Express 4.0 x4 interface serve read-intensive workloads that demand high capacity per slot. Data-centre operators who need maximum terabytes per rack unit will match this drive to their chassis. Buyers who require a different physical connector or lower capacity should look elsewhere.

Thermal and power behaviour

The drive carries a 2,000,000-hour MTBF rating for continuous operation in cooled enclosures. It withstands 1,000 G shock at .5 msec and 2.17 GRMS vibration from 5 to 700 Hz while running. Non-operating vibration tolerance reaches 3.13 GRMS across 5 to 800 Hz. These figures confirm suitability for standard server airflow designs without additional cooling provisions.

Capacity decision point

The single specification that determines fit is the 7.68TB capacity combined with the E1.S 9.5mm form factor. Systems must provide an E1.S cage and PCIe 4.0 x4 electricals to use the drive. If the chassis accepts only U.2, M.2 or a thicker E1.S variant, this unit cannot be installed.

주요 특징

  • High capacity supports dense server workloads with 7.68TB storage
  • PCIe 4.0 interface enables fast data transfer for enterprise applications
  • 144-layer TLC 3D NAND delivers reliable endurance in data-centre environments
  • 2,000,000-hour MTBF ensures long-term operational stability
  • E1.S 9.5mm form factor fits compact high-density server chassis

사양

BrandSolidigm
SeriesD7-P5520
ModelD7-P5520
Form FactorE1.S 9.5mm
Capacity7.68TB
Memory Components144L TLC 3D NAND
InterfacePCI-Express 4.0
MTBF2,000,000 hours
Max Shock Resistance1,000 G (Max) at 0.5 msec
Max Vibration ResistanceOperating: 2.17 GRMS (5 - 700 Hz) Max
Non-Operating: 3.13 GRMS (5 - 800 Hz) Max
배송 무게0.17 kg
포장 크기432 × 313 × 140 mm

이 모델의 다른 버전

같은 라인업에서 5개 더

같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.

이 상품에 대한 질문

How do I install the E1.S 9.5mm drive into my server backplane?

Slide the drive into the E1.S hot-plug cage until the connector seats and the latch clicks; the step most people miss is fully engaging the latch so the PCIe 4.0 x4 link trains at full speed.

What maintenance will the 7.68TB SSD need over its service life?

No scheduled maintenance is required; the 144L TLC 3D NAND is managed by the controller, and the drive is rated for 2,000,000 hours MTBF under normal operating conditions.

What limit appears first during sustained heavy writes on this drive?

The controller will throttle write performance once the NAND temperature approaches its thermal limit, protecting the 144L TLC 3D NAND from exceeding safe operating temperatures.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.