저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Square grey silicone thermal pad 100 by 100 by 2.0 mm

UPSIREN

UPSIREN OEM 18W 100x100x2.0mm thermal pad

SKU CH-34XX-VBNN2

A 100 × 100 × 2.0 mm silicone thermal pad rated at 18 W/mK conductivity for CPU, GPU and LED heatsink gaps

  • Volume / Net Weight23g
  • Thermal Conductivity18W/mk
  • Long Term Operating Temperature-40 to 200 C
  • FeaturesNon-Corrosive, Non-Curing & Non-Toxi

Option 100 x 100 x 2.0 mm

  • 100 x 100 x 3.0 mm
  • 100 x 100 x 0.5 mm
  • 100 x 100 x 2.0 mm
  • 100 x 100 x 1.5 mm
  • 100 x 100 x 1.0 mm
  • 100*100*2.5mm

취소선으로 표시된 버전은 존재하지만, 이곳에서는 취급하지 않습니다.

  • High thermal conductivity of 18 W/mK for efficient heat transfer
  • Non-conductive silicone ensures electrical safety on sensitive components
  • Soft 30-degree hardness allows tight conformity to uneven surfaces
  • Wide operating range from -40 °C to 200 °C without melting
  • Reusable pad with natural viscosity simplifies installation and maintenance

18 W/mK thermal pad for chips and heatsinks

The UPSIREN OEM thermal pad measures 100 by 100 millimetres with a 2.0 millimetre thickness and 23 gram mass. It delivers 18 W/mK thermal conductivity and operates from minus 40 to 200 degrees Celsius. The silicone material is non-conductive, non-corrosive, non-curing and non-toxic.

Soft 30-degree pad fits gaps without curing

A 30-degree shore hardness lets the pad compress easily and conform to uneven surfaces between a chip and its heatsink. Natural tack holds it in place during assembly yet allows repositioning or reuse. Electrical insulation prevents shorts on exposed PCB components.

Replaces grease where a solid gap-filler is needed

The pad suits builds that need a reusable, mess-free interface instead of thermal paste. It bridges larger tolerances on laptop GPUs, CPU heatspreaders, LED modules or power electronics. Buyers who require a thinner or higher-conductivity sheet should look elsewhere.

주요 특징

  • High thermal conductivity of 18 W/mK for efficient heat transfer
  • Non-conductive silicone ensures electrical safety on sensitive components
  • Soft 30-degree hardness allows tight conformity to uneven surfaces
  • Wide operating range from -40 °C to 200 °C without melting
  • Reusable pad with natural viscosity simplifies installation and maintenance

사양

BrandUPSIREN
SeriesOEM
Model18W
Volume / Net Weight23g
Thermal Conductivity18W/mk
Long Term Operating Temperature-40 to 200 C
FeaturesNon-Corrosive, Non-Curing & Non-Toxi

이 모델의 다른 버전

같은 라인업에서 5개 더

같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.

이 상품에 대한 질문

What does the 18 W/mK thermal conductivity mean for real-world heat transfer?

The pad is rated at 18 W/mK, so it moves heat from a GPU, CPU or LED module to the heatsink far more effectively than standard 1–6 W/mK pads, reducing throttling under sustained load.

Will a 100 × 100 × 2.0 mm sheet cover my laptop GPU die and VRAM in one piece?

The pad measures 100 mm by 100 mm and is 2.0 mm thick; you can cut it to the exact die and VRAM outlines, and the 30 Shore 00 softness lets it conform without excessive pressure.

How do I install it without trapping air bubbles that hurt conductivity?

Clean both surfaces with isopropyl alcohol, peel the protective film, lay the pad flat starting from one edge, then press evenly so the natural viscosity spreads it and pushes air out — do not stretch or tear the 23 g sheet.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.