저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Square grey silicone thermal pad 100 by 100 by 1.0 mm

UPSIREN

UPSIREN OEM Thermal Pad 18W/mK 100x100x1.0mm 23g

SKU CH-9E9K-28Z2Z

High-conductivity silicone pad transfers heat from CPUs, GPUs and LED modules at 18 W/mK while remaining electrically insulating and reusable

  • Volume / Net Weight23g
  • Thermal Conductivity18W/mk
  • Long Term Operating Temperature-40 to 200 C
  • FeaturesNon-Corrosive, Non-Curing & Non-Toxi

Option 100 x 100 x 1.0 mm

  • High thermal conductivity of 18 W/mK moves heat efficiently from chip to heatsink
  • Soft 30-degree pad compresses to fill gaps and maximise contact area
  • Non-conductive silicone insulates electrically for safe use on GPU, CPU and LED modules
  • Wide operating range from -40 to 200 °C withstands extreme temperatures without melting
  • Reusable 100 × 100 × 1.0 mm pad cuts to size for multiple applications

Purpose and audience

This UPSIREN OEM thermal pad measures 100x100x1.0 mm and weighs 23 g. It is intended for builders and technicians who need a compliant, non-conductive interface between a chip and a heatsink in laptops, GPUs, CPUs or LED coolers. The silicone material compresses to fill uneven gaps without electrical risk. Buyers who need a liquid or paste compound instead of a pre-cut pad should look elsewhere.

Thermal interface limits

The pad is rated at 18 W/mK thermal conductivity, though the description also references a 16 W/mK figure. It remains stable across a long-term operating range of -40 to 200 °C and will not melt within that window. A hardness of 30 degrees allows it to conform to surfaces while maintaining structural integrity. The 1.0 mm thickness defines the maximum gap it can bridge effectively.

Build quality and daily implications

The silicone construction is non-corrosive, non-curing and non-toxic, so it will not degrade metal contacts or become brittle over time. Natural viscosity holds the pad in place during assembly yet permits removal and reuse when components are swapped. Electrical insulation prevents short circuits if the pad bridges adjacent components. The material also resists fire, static, wear and compression fatigue in industrial and consumer environments.

주요 특징

  • High thermal conductivity of 18 W/mK moves heat efficiently from chip to heatsink
  • Soft 30-degree pad compresses to fill gaps and maximise contact area
  • Non-conductive silicone insulates electrically for safe use on GPU, CPU and LED modules
  • Wide operating range from -40 to 200 °C withstands extreme temperatures without melting
  • Reusable 100 × 100 × 1.0 mm pad cuts to size for multiple applications

사양

BrandUPSIREN
SeriesOEM
Model18W
Volume / Net Weight23g
Thermal Conductivity18W/mk
Long Term Operating Temperature-40 to 200 C
FeaturesNon-Corrosive, Non-Curing & Non-Toxi

이 모델의 다른 버전

같은 라인업에서 5개 더

같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.

이 상품에 대한 질문

Should I choose the 1.0 mm pad or a different thickness for my GPU?

This pad is 1.0 mm thick and 100 x 100 mm in size. Measure the gap between your GPU die and heatsink; if it matches 1.0 mm this pad will fit, otherwise select a thickness that matches your measured gap.

What does the 18 W/mK rating deliver in my laptop?

The 18 W/mK conductivity moves heat from the CPU or GPU into the heatsink efficiently, reducing throttling temperatures when the pad is compressed to fill the interface gap.

Is the silicone pad electrically conductive?

No, the pad is non-conductive and insulated, so it will not cause short circuits if it touches exposed components on the board.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.