XPG GAMMIX S70 Blade 1TB internal SSD AGAMMIXS70B-1T-CS
- Internal Solid Stat…
- Consumer
XPG
M.2 2280 NVMe SSD with heatsink delivers up to 7400 MBps read and 6800 MBps write for gaming PCs and PS5 consoles
The XPG GAMMIX S70 Blade delivers 2TB of storage in the M.2 2280 form factor. It connects through a PCI-Express 4.0 x4 interface running NVMe 1.4. Sequential reads reach up to 7400 MBps on a PC or laptop and up to 6100 MBps on a PS5. Sequential writes hit up to 6800 MBps with 750,000 IOPS for random 4KB reads and writes.
A thin aluminium heatsink is pre-fitted, raising the module height to 4.30 mm while the bare PCB measures 3.30 mm. The sink spreads heat during sustained workloads so the controller stays within its 0 °C to 70 °C operating range. No extra mounting hardware or thermal pads are required. The drive weighs 10.00 g with the heatsink and 7.00 g without it.
3D NAND flash is rated for 1480 terabytes written and a mean time between failures of 2,000,000 hours. Shock resistance is specified at 1500G for 0.5 ms. The M.2 2280 key‑M connector fits standard motherboard slots and the PS5 expansion bay. Width is 25.20 mm and depth is 80.00 mm. Storage temperature spans -40 °C to 85 °C.
| Brand | XPG |
|---|---|
| Series | GAMMIX S70 Blade |
| Model | AGAMMIXS70B-2T-CS |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | M.2 2280 |
| Capacity | 2TB |
| Memory Components | 3D NAND |
| Interface | PCI-Express 4.0 x4, NVMe 1.4 |
| Max Sequential Read | Up to 7400 MBps (PC/laptop) Up to 6100 MBps (PS5) |
| Max Sequential Write | Up to 6800 MBps |
| 4KB Random Read | Up to 750,000 IOPS |
| 4KB Random Write | Up to 750,000 IOPS |
| Terabytes Written (TBW) | 1480TB |
| MTBF | 2,000,000 hours |
| HeatSink | with HeatSink |
| Features | Speed Ahead with PCIe 4.0 Cool in the Heat of Battle Perfect for Compact and Thin Devices Works with PS5 Compliant with NVMe 1.4 Boosting Your Performance The Ultimate Game Cache Security and Integrity |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -40°C ~ +85°C |
| Max Shock Resistance | 1500G/0.5ms |
| Height | 4.30mm (with heat sink) 3.30mm (with heat sink) |
| Width | 25.20mm |
| Depth | 80.00mm |
| Weight | 10.00g (with heat sink) 7.00g (without heat sink) |
| 배송 무게 | 0.03 kg |
| 포장 크기 | 130 × 102 × 15 mm |
이 모델의 다른 버전
같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.
The drive measures 4.30mm tall with the heatsink attached, matching the PS5 M.2 slot clearance limit. Width is 25.20mm and depth 80.00mm, so it sits flush without forcing the cover.
1480TBW equals roughly 800GB written every day for five years, well above typical game installs, captures and patches. The 2M-hour MTBF and 1500G shock rating add further durability headroom.
On a PCIe 4.0 desktop the drive reaches up to 7400MBps read and 6800MBps write. On PS5 the read ceiling is 6100MBps due to the console's thermal and firmware limits.
이 진열대의 다른 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
결제할 코인과 가격을 확인할 통화입니다.
체크아웃 시 지갑에서 전송됩니다.
표시 전용 — 카탈로그 가격은 달러 기준입니다.
일치하는 통화가 없습니다.
사이트에서 사용할 언어를 선택하십시오.
일치하는 언어가 없습니다.
처음 방문하셨나요?
이미 계정이 있으신가요?
자동 재설정 기능은 없습니다. 이 쇼핑몰은 어떠한 메일도 보내지 않으므로 요청할 일회용 링크 자체가 없습니다. 계정에 등록된 이메일 주소를 그대로 두시면 담당자가 직접 확인해 처리합니다.
요청 접수
받은편지함으로 오는 것은 아무것도 없습니다 — 이 쇼핑몰은 메일을 전혀 보내지 않습니다. 담당자가 직접 확인해 처리합니다.
기억나셨나요?