XPG ASX6000LNP-256GT-C SX6000 Lite 256GB internal SSD
- Internal Solid Stat…
- Consumer
XPG
512 GB M.2 2280 PCIe 3.0 x4 SSD delivering up to 1800 MB/s read and 1200 MB/s write with 240 TBW endurance
Options 512GB Lite
The XPG SX6000 Lite is a 512GB internal solid state drive using the M.2 2280 form factor and a PCI-Express 3.0 x4 connection. It supports the NVMe 1.3 protocol and uses 3D NAND flash with advanced LDPC ECC, HMB and SLC caching to deliver sequential reads up to 1800 MBps and writes up to 1200 MBps. Endurance is rated at 240TB written with a 1.8 million hour MTBF.
This drive suits users upgrading a laptop, ultrabook or desktop that has an M.2 slot wired for PCI-Express 3.0 x4 and wants a noticeable speed lift over a SATA SSD. Systems limited to SATA-only M.2 slots or older PCIe 2.0 lanes will not realise the quoted throughput, so a SATA M.2 drive may be a better match.
Verify that your motherboard or laptop provides an M.2 2280 slot keyed for PCI-Express 3.0 x4 NVMe operation and that the BIOS recognises NVMe boot devices. Confirm the operating temperature range of 0°C to 70°C fits your chassis airflow, and ensure the power budget can accommodate 0.33W active draw.
| Brand | XPG |
|---|---|
| Series | SX6000 Lite |
| Model | ASX6000LNP-512GT-C |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | M.2 2280 |
| Capacity | 512GB |
| Memory Components | 3D NAND |
| Interface | PCI-Express 3.0 x4 |
| Max Sequential Read | Up to 1800 MBps |
| Max Sequential Write | Up to 1200 MBps |
| 4KB Random Read | Up to 180,000 IOPS |
| 4KB Random Write | Up to 200,000 IOPS |
| Terabytes Written (TBW) | 240TB |
| MTBF | 1,800,000 hours |
| Features | TBW: 240TB NVMe 1.3 support 3D NAND Flash for higher capacity and durability Advanced LDPC ECC Technology HMB (Host Memory Buffer) and SLC Caching Compact M.2 2280 form factor - ideal for high-end desktops, notebooks and Ultrabooks |
| Power Consumption (Idle) | 0.14W |
| Power Consumption (Active) | 0.33W |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -40°C ~ +85°C |
| Max Shock Resistance | 1500G / 0.5 ms |
| Height | 2.15mm |
| Width | 22.00mm |
| Depth | 80.00mm |
| Weight | 8.00g |
| 배송 무게 | 0.03 kg |
| 포장 크기 | 132 × 102 × 18 mm |
이 모델의 다른 버전
같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.
Yes, the drive uses the M.2 2280 form factor and requires a PCI-Express 3.0 x4 connection to operate at its rated speeds of up to 1800 MBps read and 1200 MBps write.
Yes, the drive installs in an M.2 slot while your SATA SSD stays connected to its own port; the system will see both drives independently.
Run a sequential benchmark such as CrystalDiskMark; results near 1800 MBps read and 1200 MBps write confirm the PCI-Express 3.0 x4 link and NVMe 1.3 support are active.
이 진열대의 다른 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
결제할 코인과 가격을 확인할 통화입니다.
체크아웃 시 지갑에서 전송됩니다.
표시 전용 — 카탈로그 가격은 달러 기준입니다.
일치하는 통화가 없습니다.
사이트에서 사용할 언어를 선택하십시오.
일치하는 언어가 없습니다.
처음 방문하셨나요?
이미 계정이 있으신가요?
자동 재설정 기능은 없습니다. 이 쇼핑몰은 어떠한 메일도 보내지 않으므로 요청할 일회용 링크 자체가 없습니다. 계정에 등록된 이메일 주소를 그대로 두시면 담당자가 직접 확인해 처리합니다.
요청 접수
받은편지함으로 오는 것은 아무것도 없습니다 — 이 쇼핑몰은 메일을 전혀 보내지 않습니다. 담당자가 직접 확인해 처리합니다.
기억나셨나요?