Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Green 204-pin DDR3 SODIMM module with black chips

A-Tech

A-Tech 4GB DDR3 1600 SODIMM 204-Pin CL11 1.5V for Hynix HMT351S6BFR8C-PB HMT351S6CFR8C-PB HMT351S6EFR8C-PB

SKU CH-G2P2-Z2WTN

4GB DDR3 1600 SODIMM module with CL11 latency and 1.5V operation for compatible laptops

  • Capacity4GB
  • Type204-Pin DDR3 SO-DIMM
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.50V
  • ECCNo
  • Boosts multitasking with 4GB DDR3 1600MHz CL11 memory
  • Fits 204-pin laptop slots for direct DDR3 upgrades
  • Runs at standard 1.5V DDR3 voltage for broad compatibility
  • Non-ECC unbuffered design works with AMD and Intel platforms
  • Replaces Hynix HMT351S6BFR8C-PB, HMT351S6CFR8C-PB, HMT351S6EFR8C-PB modules

Compatible DDR3 1600 SO-DIMM

This A-Tech module is a 4 GB DDR3 1600 (PC3-12800) SO-DIMM built to replace Hynix parts HMT351S6BFR8C-PB, HMT351S6CFR8C-PB and HMT351S6EFR8C-PB. It uses the standard 204-pin layout, runs at 1.5 V with CL11 latency and is unbuffered non-ECC. The stick is designed for laptop, notebook and all-in-one systems that accept DDR3 SO-DIMM memory.

Fits DDR3 laptop slots only

The module suits owners of DDR3-based laptops or all-in-ones needing a direct 4 GB replacement for the listed Hynix part numbers. It will not fit systems that require a different pin count, a different voltage or registered DIMMs. Buyers who need higher capacity per slot, ECC functionality or a newer memory generation should look elsewhere.

204-pin DDR3 SO-DIMM form factor

The single specification that decides compatibility is the 204-pin DDR3 SO-DIMM form factor combined with 1.5 V operation. If the service manual or BIOS memory list for your machine calls for a 204-pin DDR3 1600 SO-DIMM at 1.5 V, this module matches that requirement.

Pluspunten

  • Boosts multitasking with 4GB DDR3 1600MHz CL11 memory
  • Fits 204-pin laptop slots for direct DDR3 upgrades
  • Runs at standard 1.5V DDR3 voltage for broad compatibility
  • Non-ECC unbuffered design works with AMD and Intel platforms
  • Replaces Hynix HMT351S6BFR8C-PB, HMT351S6CFR8C-PB, HMT351S6EFR8C-PB modules

Specificaties

BrandA-Tech
Capacity4GB
Type204-Pin DDR3 SO-DIMM
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.50V
ECCNo
Buffered/RegisteredUnbuffered
Recommend UseAMD & Intel Compatible

Vragen over dit artikel

Will this 204-pin DDR3 SO-DIMM fit my laptop's memory slot?

This module uses the standard 204-pin DDR3 SO-DIMM form factor used by most laptops that support DDR3 1600 memory.

How do I install this SODIMM correctly?

Align the notch on the module with the key in the slot, insert the module firmly, then press down until the side retention clips snap into place.

Does this 1.5V DDR3 module need any maintenance or replacement over time?

Memory modules have no moving parts and require no routine maintenance; they are replaced only if a fault develops or a capacity upgrade is desired.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.