저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인

A-Tech

A-Tech 4GB DDR3 1600 SODIMM 204-Pin CL11 1.5V for Hynix HMT351S6BFR8C-PB HMT351S6CFR8C-PB HMT351S6EFR8C-PB

SKU CH-G2P2-Z2WTN

4GB DDR3 1600 SODIMM module with CL11 latency and 1.5V operation for compatible laptops

  • Capacity4GB
  • Type204-Pin DDR3 SO-DIMM
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.50V
  • ECCNo
  • Boosts multitasking with 4GB DDR3 1600MHz CL11 memory
  • Fits 204-pin laptop slots for direct DDR3 upgrades
  • Runs at standard 1.5V DDR3 voltage for broad compatibility
  • Non-ECC unbuffered design works with AMD and Intel platforms
  • Replaces Hynix HMT351S6BFR8C-PB, HMT351S6CFR8C-PB, HMT351S6EFR8C-PB modules

Compatible DDR3 1600 SO-DIMM

This A-Tech module is a 4 GB DDR3 1600 (PC3-12800) SO-DIMM built to replace Hynix parts HMT351S6BFR8C-PB, HMT351S6CFR8C-PB and HMT351S6EFR8C-PB. It uses the standard 204-pin layout, runs at 1.5 V with CL11 latency and is unbuffered non-ECC. The stick is designed for laptop, notebook and all-in-one systems that accept DDR3 SO-DIMM memory.

Fits DDR3 laptop slots only

The module suits owners of DDR3-based laptops or all-in-ones needing a direct 4 GB replacement for the listed Hynix part numbers. It will not fit systems that require a different pin count, a different voltage or registered DIMMs. Buyers who need higher capacity per slot, ECC functionality or a newer memory generation should look elsewhere.

204-pin DDR3 SO-DIMM form factor

The single specification that decides compatibility is the 204-pin DDR3 SO-DIMM form factor combined with 1.5 V operation. If the service manual or BIOS memory list for your machine calls for a 204-pin DDR3 1600 SO-DIMM at 1.5 V, this module matches that requirement.

주요 특징

  • Boosts multitasking with 4GB DDR3 1600MHz CL11 memory
  • Fits 204-pin laptop slots for direct DDR3 upgrades
  • Runs at standard 1.5V DDR3 voltage for broad compatibility
  • Non-ECC unbuffered design works with AMD and Intel platforms
  • Replaces Hynix HMT351S6BFR8C-PB, HMT351S6CFR8C-PB, HMT351S6EFR8C-PB modules

사양

BrandA-Tech
Capacity4GB
Type204-Pin DDR3 SO-DIMM
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.50V
ECCNo
Buffered/RegisteredUnbuffered
Recommend UseAMD & Intel Compatible

이 상품에 대한 질문

Will this 204-pin DDR3 SO-DIMM fit my laptop's memory slot?

This module uses the standard 204-pin DDR3 SO-DIMM form factor used by most laptops that support DDR3 1600 memory.

How do I install this SODIMM correctly?

Align the notch on the module with the key in the slot, insert the module firmly, then press down until the side retention clips snap into place.

Does this 1.5V DDR3 module need any maintenance or replacement over time?

Memory modules have no moving parts and require no routine maintenance; they are replaced only if a fault develops or a capacity upgrade is desired.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.