暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green 204-pin DDR3 SODIMM module with black chips

A-Tech

A-Tech 4GB DDR3 1600 SODIMM 204-Pin CL11 1.5V for Hynix HMT351S6BFR8C-PB HMT351S6CFR8C-PB HMT351S6EFR8C-PB

SKU CH-G2P2-Z2WTN

4GB DDR3 1600 SODIMM module with CL11 latency and 1.5V operation for compatible laptops

  • Capacity4GB
  • Type204-Pin DDR3 SO-DIMM
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.50V
  • ECCNo
  • Boosts multitasking with 4GB DDR3 1600MHz CL11 memory
  • Fits 204-pin laptop slots for direct DDR3 upgrades
  • Runs at standard 1.5V DDR3 voltage for broad compatibility
  • Non-ECC unbuffered design works with AMD and Intel platforms
  • Replaces Hynix HMT351S6BFR8C-PB, HMT351S6CFR8C-PB, HMT351S6EFR8C-PB modules

Compatible DDR3 1600 SO-DIMM

This A-Tech module is a 4 GB DDR3 1600 (PC3-12800) SO-DIMM built to replace Hynix parts HMT351S6BFR8C-PB, HMT351S6CFR8C-PB and HMT351S6EFR8C-PB. It uses the standard 204-pin layout, runs at 1.5 V with CL11 latency and is unbuffered non-ECC. The stick is designed for laptop, notebook and all-in-one systems that accept DDR3 SO-DIMM memory.

Fits DDR3 laptop slots only

The module suits owners of DDR3-based laptops or all-in-ones needing a direct 4 GB replacement for the listed Hynix part numbers. It will not fit systems that require a different pin count, a different voltage or registered DIMMs. Buyers who need higher capacity per slot, ECC functionality or a newer memory generation should look elsewhere.

204-pin DDR3 SO-DIMM form factor

The single specification that decides compatibility is the 204-pin DDR3 SO-DIMM form factor combined with 1.5 V operation. If the service manual or BIOS memory list for your machine calls for a 204-pin DDR3 1600 SO-DIMM at 1.5 V, this module matches that requirement.

特長

  • Boosts multitasking with 4GB DDR3 1600MHz CL11 memory
  • Fits 204-pin laptop slots for direct DDR3 upgrades
  • Runs at standard 1.5V DDR3 voltage for broad compatibility
  • Non-ECC unbuffered design works with AMD and Intel platforms
  • Replaces Hynix HMT351S6BFR8C-PB, HMT351S6CFR8C-PB, HMT351S6EFR8C-PB modules

仕様

BrandA-Tech
Capacity4GB
Type204-Pin DDR3 SO-DIMM
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.50V
ECCNo
Buffered/RegisteredUnbuffered
Recommend UseAMD & Intel Compatible

この商品に関する質問

Will this 204-pin DDR3 SO-DIMM fit my laptop's memory slot?

This module uses the standard 204-pin DDR3 SO-DIMM form factor used by most laptops that support DDR3 1600 memory.

How do I install this SODIMM correctly?

Align the notch on the module with the key in the slot, insert the module firmly, then press down until the side retention clips snap into place.

Does this 1.5V DDR3 module need any maintenance or replacement over time?

Memory modules have no moving parts and require no routine maintenance; they are replaced only if a fault develops or a capacity upgrade is desired.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。