A-Tech
A-Tech 4GB DDR3 1600 SODIMM 204-Pin CL11 1.5V for Hynix HMT351S6BFR8C-PB HMT351S6CFR8C-PB HMT351S6EFR8C-PB
4GB DDR3 1600 SODIMM module with CL11 latency and 1.5V operation for compatible laptops
- Capacity4GB
- Type204-Pin DDR3 SO-DIMM
- SpeedDDR3 1600 (PC3 12800)
- CAS LatencyCL11
- Voltage1.50V
- ECCNo
- Boosts multitasking with 4GB DDR3 1600MHz CL11 memory
- Fits 204-pin laptop slots for direct DDR3 upgrades
- Runs at standard 1.5V DDR3 voltage for broad compatibility
- Non-ECC unbuffered design works with AMD and Intel platforms
- Replaces Hynix HMT351S6BFR8C-PB, HMT351S6CFR8C-PB, HMT351S6EFR8C-PB modules
Compatible DDR3 1600 SO-DIMM
This A-Tech module is a 4 GB DDR3 1600 (PC3-12800) SO-DIMM built to replace Hynix parts HMT351S6BFR8C-PB, HMT351S6CFR8C-PB and HMT351S6EFR8C-PB. It uses the standard 204-pin layout, runs at 1.5 V with CL11 latency and is unbuffered non-ECC. The stick is designed for laptop, notebook and all-in-one systems that accept DDR3 SO-DIMM memory.
Fits DDR3 laptop slots only
The module suits owners of DDR3-based laptops or all-in-ones needing a direct 4 GB replacement for the listed Hynix part numbers. It will not fit systems that require a different pin count, a different voltage or registered DIMMs. Buyers who need higher capacity per slot, ECC functionality or a newer memory generation should look elsewhere.
204-pin DDR3 SO-DIMM form factor
The single specification that decides compatibility is the 204-pin DDR3 SO-DIMM form factor combined with 1.5 V operation. If the service manual or BIOS memory list for your machine calls for a 204-pin DDR3 1600 SO-DIMM at 1.5 V, this module matches that requirement.
จุดเด่น
- Boosts multitasking with 4GB DDR3 1600MHz CL11 memory
- Fits 204-pin laptop slots for direct DDR3 upgrades
- Runs at standard 1.5V DDR3 voltage for broad compatibility
- Non-ECC unbuffered design works with AMD and Intel platforms
- Replaces Hynix HMT351S6BFR8C-PB, HMT351S6CFR8C-PB, HMT351S6EFR8C-PB modules
ข้อมูลจำเพาะ
| Brand | A-Tech |
|---|---|
| Capacity | 4GB |
| Type | 204-Pin DDR3 SO-DIMM |
| Speed | DDR3 1600 (PC3 12800) |
| CAS Latency | CL11 |
| Voltage | 1.50V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Recommend Use | AMD & Intel Compatible |
คำถามเกี่ยวกับสินค้านี้
Will this 204-pin DDR3 SO-DIMM fit my laptop's memory slot?
This module uses the standard 204-pin DDR3 SO-DIMM form factor used by most laptops that support DDR3 1600 memory.
How do I install this SODIMM correctly?
Align the notch on the module with the key in the slot, insert the module firmly, then press down until the side retention clips snap into place.
Does this 1.5V DDR3 module need any maintenance or replacement over time?
Memory modules have no moving parts and require no routine maintenance; they are replaced only if a fault develops or a capacity upgrade is desired.
อื่น ๆ ในหมวดนี้
ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที
Mushkin Enhanced 4GB DDR2-800 CL6 SoDIMM Apple 971741A memory upgrade
SK hynix HYMD232M646C6-J 256MB DDR 333MHz PC2700 CL2.5 SODIMM laptop RAM
- 4GB (2 x 2GB)



