Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen

Orico

Orico USB 3.0 to SATA Cable 5Gbps Hard Drive Adapter Type-C 1m With Cover

SKU CH-AJRQ-782KA

Connects a 2.5 SATA drive to a USB Type-C port at up to 5Gbps with UASP support and a 5V power port for drives up to 6TB

  • Changer TypeUSB Type-C to SATA

Changer Type USB Type-C to SATA

Model 1m

Option With Cover

  • Connect 2.5 SATA drives via USB Type-C
  • UASP support delivers up to 5Gbps transfer speed
  • Tested throughput reaches 480M/s for large files
  • Built-in 5V power port runs drives up to 6TB
  • Driver-free operation on Windows, Linux, Mac OS and Android

USB-C to SATA adapter for 2.5 drives

This cable connects a 2.5 SATA hard drive or SSD to a USB Type-C port on a laptop, desktop or Android device. It is aimed at users who need quick access to bare drives for data recovery, cloning or extra storage without an enclosure. No drivers are required on Windows, Linux, Mac OS or Android. The 1 metre length gives flexible placement on a desk.

Handles drives up to 6TB with optional power

The adapter powers most 2.5 drives directly from the host port and includes a reserved Type-C 5V input for larger units. The manufacturer states it drives a 6TB hard disk easily, so capacity headroom is generous for current 2.5 models. Very high-capacity drives or those with above-average spin-up current may still need the auxiliary power connection. Transfer rates peak at the USB 3.0 limit rather than the drive’s own maximum.

Limited by USB 3.0 5Gbps and UASP overhead

The link uses USB 3.0 to SATA 3.0 with UASP protocol, rated at 5Gbps. In testing the supplier recorded 480M/s, which is the practical ceiling for this interface. SATA SSDs capable of 6Gbps will be bottlenecked, and mechanical drives will not saturate the link. The 1m cable adds negligible latency but does not overcome the bandwidth constraint.

Pluspunten

  • Connect 2.5 SATA drives via USB Type-C
  • UASP support delivers up to 5Gbps transfer speed
  • Tested throughput reaches 480M/s for large files
  • Built-in 5V power port runs drives up to 6TB
  • Driver-free operation on Windows, Linux, Mac OS and Android

Specificaties

Changer TypeUSB Type-C to SATA

Andere versies van dit model

Nog 5 in dezelfde serie

Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.

Vragen over dit artikel

Will this USB Type-C to SATA adapter work with my older 2.5 inch SATA hard drive or SSD?

Yes, it connects 2.5 inch SATA drives via USB Type-C and supports drives up to 6TB using the reserved 5V power port.

How can I confirm the adapter is running at full USB 3.0 speed with UASP after I plug it in?

Check your OS device manager or system profiler for a UASP-attached SATA device and run a large-file transfer; sustained reads near 480 MB/s indicate full performance.

Does the 1 metre cable include the Type-C 5V power connector, or do I need a separate power supply for larger drives?

The cable has a built-in Type-C 5V power port; a separate 5V USB power source is required only when the host port cannot supply enough current for the drive.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.