Orico
Orico USB 3.0 to SATA Cable 5Gbps Hard Drive Adapter Type-C 1m With Cover
Connects a 2.5 SATA drive to a USB Type-C port at up to 5Gbps with UASP support and a 5V power port for drives up to 6TB
- Changer TypeUSB Type-C to SATA
Changer Type USB Type-C to SATA
- USB 2.0 to SATA
- USB 3.0 to SATA
- USB Type-C to SATA
Option With Cover
- 2.5in HDD/SSD
- With Cover
- Connect 2.5 SATA drives via USB Type-C
- UASP support delivers up to 5Gbps transfer speed
- Tested throughput reaches 480M/s for large files
- Built-in 5V power port runs drives up to 6TB
- Driver-free operation on Windows, Linux, Mac OS and Android
USB-C to SATA adapter for 2.5 drives
This cable connects a 2.5 SATA hard drive or SSD to a USB Type-C port on a laptop, desktop or Android device. It is aimed at users who need quick access to bare drives for data recovery, cloning or extra storage without an enclosure. No drivers are required on Windows, Linux, Mac OS or Android. The 1 metre length gives flexible placement on a desk.
Handles drives up to 6TB with optional power
The adapter powers most 2.5 drives directly from the host port and includes a reserved Type-C 5V input for larger units. The manufacturer states it drives a 6TB hard disk easily, so capacity headroom is generous for current 2.5 models. Very high-capacity drives or those with above-average spin-up current may still need the auxiliary power connection. Transfer rates peak at the USB 3.0 limit rather than the drive’s own maximum.
Limited by USB 3.0 5Gbps and UASP overhead
The link uses USB 3.0 to SATA 3.0 with UASP protocol, rated at 5Gbps. In testing the supplier recorded 480M/s, which is the practical ceiling for this interface. SATA SSDs capable of 6Gbps will be bottlenecked, and mechanical drives will not saturate the link. The 1m cable adds negligible latency but does not overcome the bandwidth constraint.
商品特色
- Connect 2.5 SATA drives via USB Type-C
- UASP support delivers up to 5Gbps transfer speed
- Tested throughput reaches 480M/s for large files
- Built-in 5V power port runs drives up to 6TB
- Driver-free operation on Windows, Linux, Mac OS and Android
商品規格
| Changer Type | USB Type-C to SATA |
|---|
其他版本
同系列還有 5 款
同系列產品,記憶體、散熱器或時脈不同 — 下單前請先比較。
Orico USB 3.0 to SATA 2.5 inch Hard Drive Adapter 1m With Cover
- USB 2.0 to SATA
商品問答
Will this USB Type-C to SATA adapter work with my older 2.5 inch SATA hard drive or SSD?
Yes, it connects 2.5 inch SATA drives via USB Type-C and supports drives up to 6TB using the reserved 5V power port.
How can I confirm the adapter is running at full USB 3.0 speed with UASP after I plug it in?
Check your OS device manager or system profiler for a UASP-attached SATA device and run a large-file transfer; sustained reads near 480 MB/s indicate full performance.
Does the 1 metre cable include the Type-C 5V power connector, or do I need a separate power supply for larger drives?
The cable has a built-in Type-C 5V power port; a separate 5V USB power source is required only when the host port cannot supply enough current for the drive.
同類商品
顧客也比較過
同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。
Black Box Corporation DisplayPort to DVI Fibre Optic Cable 15 ft 4.5 m 1.35 GB/s
- Consumer Electronics








