We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green 288-pin DDR4 RDIMM modules, black chips, gold contacts

A-Tech

A-Tech 128GB (2x64GB) DDR4 2400 ECC RDIMM 2S2Rx4 3DS Server RAM

SKU CH-YF7H-8YWCP

128GB dual-channel DDR4 ECC RDIMM kit with two 64GB quad-rank 3DS modules running at 2400MHz CL17 and 1.2V

  • Capacity128GB (2 x 64GB)
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered

Capacity 128GB (2 x 64GB)

  • 64GB
  • 128GB (2 x 64GB)
  • 128 GB total capacity with two 64 GB modules
  • DDR4 2400 MHz speed rated at PC4-19200
  • ECC registered RDIMM protects data integrity
  • Quad-rank 3DS/TSV architecture maximises density
  • 2 V standard voltage reduces power draw

128GB DDR4 ECC Registered Kit

This 128GB kit contains two 64GB DDR4 2400 modules built for servers and workstations that require ECC registered memory. The dual-channel configuration adds capacity while maintaining signal integrity through the registered buffer.

Quad-rank 3DS stacking and 288-pin form factor

Each module uses 2S2Rx4 quad-rank x4 organisation with 3DS through-silicon via stacking to reach 64GB density on a standard 288-pin DIMM. Registered buffering reduces electrical load on the memory controller, a requirement for multi-DIMM server boards.

DDR4 2400 CL17 at 1.2V defines the operating

The modules run at PC4-19200 speed with CAS latency 17 and standard 1.2V DDR4 voltage. Compatibility is limited to platforms that explicitly support DDR4 ECC registered DIMMs with quad-rank 3DS topology; desktop and laptop systems cannot use this memory.

Highlights

  • 128 GB total capacity with two 64 GB modules
  • DDR4 2400 MHz speed rated at PC4-19200
  • ECC registered RDIMM protects data integrity
  • Quad-rank 3DS/TSV architecture maximises density
  • 2 V standard voltage reduces power draw

Specifications

BrandA-Tech
SeriesA-Tech DDR4 Server Memory RAM
ModelA-Tech 64GB 2S2Rx4 PC4-2400T-R
Capacity128GB (2 x 64GB)
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank2S2Rx4 (4Rx4 3DS/TSV)
Multi-channel KitDual Channel Kit
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Other versions of this model

1 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Does the PC4-19200 rating on these DDR4 2400 modules limit the throughput in a single-channel server slot?

The PC4-19200 rating matches the DDR4 2400 speed of each 64 GB module; actual throughput depends on the server's memory controller and channel configuration.

What physical slot and clearance do the 288-pin ECC RDIMM modules need in a server chassis?

Each module uses a standard 288-pin DDR4 DIMM slot; verify the motherboard supports 3DS/TSV quad-rank RDIMMs and that heatsink height clears the module.

What is the correct installation sequence for this dual-channel 2x64 GB kit, and which step is commonly missed?

Populate the two modules in the motherboard's designated dual-channel slots (usually same-coloured banks), seat each until the retention clips lock, then confirm the BIOS recognises 128 GB at DDR4 2400 with ECC active.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.