We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR3L 240-pin ECC RDIMM modules with black chips

A-Tech

A-Tech 16GB (2x8GB) DDR3L 1600 ECC RDIMM 2Rx8 1.35V Server RAM

SKU CH-S4ZP-VG0NV

A 16 GB dual-channel kit of registered ECC DDR3L 1600 RDIMMs for servers and workstations

  • Capacity16GB (2 x 8GB)
  • SpeedDDR3L 1600 (PC3L 12800)
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCYes
  • Buffered/RegisteredRegistered

Capacity 16GB (2 x 8GB)

Speed DDR3L 1600 (PC3L 12800)

  • Dual-channel kit doubles throughput for server workloads using two matched 8 GB modules
  • ECC registered design detects and corrects single-bit errors to protect data integrity
  • Low-voltage DDR3L runs at 1.35 V reducing power draw and heat in dense chassis
  • 1600 MHz CL11 speed rating delivers responsive performance for virtualisation and databases
  • 240-pin RDIMM form factor fits compatible DDR3 server and workstation platforms

DDR3L ECC RDIMM kit

This 16GB kit contains two 8GB DDR3L registered DIMMs rated at 1600 MHz with CL11 latency and 1.35V operation. It is built for servers and workstations that require ECC error correction and registered buffering for data integrity. The modules use major-brand chips in a dual-rank x8 configuration across 240 pins.

Upgrade from non-ECC or lower capacity

Systems running unbuffered non-ECC memory or smaller registered kits gain error detection and higher total capacity with this kit. The jump is worth it when workloads demand sustained uptime and the motherboard supports DDR3L registered DIMMs at 1.35V or 1.5V.

Dual-channel registered server memory

The pair installs in matched channels on compatible server or workstation boards that accept 240-pin DDR3L RDIMMs. It frees DIMM slots compared to populating four 4GB modules while delivering 16GB of registered ECC capacity. Verify your platform manual for supported population rules and maximum registered memory per channel.

Highlights

  • Dual-channel kit doubles throughput for server workloads using two matched 8 GB modules
  • ECC registered design detects and corrects single-bit errors to protect data integrity
  • Low-voltage DDR3L runs at 1.35 V reducing power draw and heat in dense chassis
  • 1600 MHz CL11 speed rating delivers responsive performance for virtualisation and databases
  • 240-pin RDIMM form factor fits compatible DDR3 server and workstation platforms

Specifications

BrandA-Tech
SeriesA-Tech DDR3 Server Memory RAM
ModelA-Tech 8GB 2Rx8 PC3L-12800R
Capacity16GB (2 x 8GB)
SpeedDDR3L 1600 (PC3L 12800)
CAS LatencyCL11
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
Multi-channel KitDual Channel Kit
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Does the 240-pin DDR3L RDIMM fit a standard server DIMM slot?

Yes, the 240-pin DDR3L RDIMM matches the standard registered DIMM slot used in compatible DDR3 servers and workstations.

What is the correct seating order for the dual-channel 2x8GB kit?

Install the two modules in the same coloured DIMM slots per the motherboard manual to activate dual-channel mode.

Will the 1.35V modules need a voltage change if the system runs at 1.5V?

No, the DDR3L modules operate at 1.35V or 1.5V automatically without BIOS adjustment.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.