We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green rectangular circuit board with gold edge connectors and black memory chips, no heat spreader

A-Tech

A-Tech 16GB DDR3 1866/1867MHz ECC RDIMM 240-Pin memory upgrade

SKU CH-ZQ82-A8481

16GB DDR3 1866MHz ECC registered RDIMM for Apple Mac Pro Late 2013 cylinder

  • Capacity16GB
  • SpeedDDR3 1866 (PC3 14900)
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor Brand Chipset
  • 16GB DDR3 1866MHz ECC RDIMM boosts Mac Pro responsiveness
  • Registered 240-pin module with major-brand chips ensures data integrity
  • 50V operation matches Late 2013 Mac Pro power spec
  • Validated for MacPro6,1 A1481 EMC 2630 cylinder systems
  • Compatible with Xeon 3.7 1620v2 3.5 1650v2 3.0 1680v2 2.7 2697v2 CPUs

Target system

This 16GB DDR3 1866/1867MHz ECC RDIMM is built for the Apple Mac Pro Late 2013 cylinder model. It matches the MacPro6,1 and A1481 EMC 2630 specifications and works with the listed 3.7GHz Xeon E5-1620v2, 3.5GHz Xeon E5-1650v2, 3.0GHz Xeon E5-1680v2 and 2.7GHz Xeon E5-2697v2 processors. The module runs at 1.50V and uses registered ECC chips on a 240-pin form factor.

Upgrade path

It replaces the factory-installed memory in the Mac Pro Cylinder and adds capacity beyond the original configuration. The jump is worth it when workloads exceed the stock amount and the system shows memory pressure during multitasking or rendering. Buyers who need more than four modules or who require non-ECC memory for a different platform cannot use this kit.

Platform limits

The Mac Pro Late 2013 accepts only DDR3 RDIMM modules at 1866/1867MHz with ECC registration. Standard unbuffered DIMMs, higher speeds or different voltages will not be recognised by the firmware. The four-slot architecture caps total memory at the sum of installed modules, so this single 16GB stick contributes toward that ceiling without exceeding the electrical or timing constraints of the platform.

Highlights

  • 16GB DDR3 1866MHz ECC RDIMM boosts Mac Pro responsiveness
  • Registered 240-pin module with major-brand chips ensures data integrity
  • 50V operation matches Late 2013 Mac Pro power spec
  • Validated for MacPro6,1 A1481 EMC 2630 cylinder systems
  • Compatible with Xeon 3.7 1620v2 3.5 1650v2 3.0 1680v2 2.7 2697v2 CPUs

Specifications

BrandA-Tech
SeriesA-Tech DDR3 Apple Mac RAM Memory Upgrades
Capacity16GB
SpeedDDR3 1866 (PC3 14900)
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemApple Mac Systems
FeaturesMajor Brand Chips

Questions about this item

Will this 240-pin RDIMM fit inside the Mac Pro (Late 2013) cylinder without a heat spreader?

Yes, the module is a bare 240-pin RDIMM without a heat spreader, matching the Mac Pro (Late 2013) memory bay design.

Do I need to install this 16GB ECC RDIMM in matched pairs or can I add a single module?

You can add a single 16GB module; the Mac Pro (Late 2013) supports independent population of its four slots.

When should I expect to replace this DDR3 1866MHz ECC module in a Mac Pro running Xeon E5-1650v2 or E5-2697v2 CPUs?

DDR3 ECC RDIMMs have no scheduled replacement interval; swap only if diagnostics report correctable errors or a module fails.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.