We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

A-Tech

A-Tech 16GB DDR4 2400MHz PC4-19200 DIMM 2Rx8 desktop RAM

SKU CH-M5JG-58DBA

A 16 GB DDR4 desktop DIMM running at 2400 MHz with 1.2 V standard voltage and unbuffered non-ECC operation

  • Capacity16GB
  • SpeedDDR4 2400 (PC4 19200)
  • Tested Frequency2400
  • Voltage1.20V
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • 16 GB capacity lets you run heavier workloads
  • DDR4 2400 MHz speed moves data at PC4-19200 rates
  • 2 V operation matches standard DDR4 voltage
  • 288-pin DIMM form factor fits desktop motherboards
  • Non-ECC unbuffered design suits consumer desktop systems

Capacity and Compatibility

This 16GB DDR4 module runs at 2400MHz with a PC4-19200 rating and standard 1.20V operation. The unbuffered, non-ECC 288-pin DIMM uses a 2Rx8 organisation and is tested as a direct replacement for Samsung M378A2K43BB1-CRC and M378A2K43CB1-CRC modules.

Sustained Workload Behaviour

Under continuous load the module maintains its rated 2400MHz frequency at the JEDEC 1.20V level without requiring overclocking headroom. Quality assurance testing verifies stability across extended sessions, so multitasking and heavier workloads see consistent throughput rather than throttling after a short burst.

DDR4 Interface Limits

The DDR4 2400 standard caps single-module bandwidth at the PC4-19200 figure, so total system throughput depends on the number of populated slots and the memory controller's maximum supported speed. Builders who need more capacity than a single 16GB stick provides must add modules within the platform's slot and density limits.

Highlights

  • 16 GB capacity lets you run heavier workloads
  • DDR4 2400 MHz speed moves data at PC4-19200 rates
  • 2 V operation matches standard DDR4 voltage
  • 288-pin DIMM form factor fits desktop motherboards
  • Non-ECC unbuffered design suits consumer desktop systems

Specifications

BrandA-Tech
Capacity16GB
SpeedDDR4 2400 (PC4 19200)
Tested Frequency2400
Voltage1.20V
ECCNo
Buffered/RegisteredUnbuffered
Recommend UseAMD & Intel Compatible

Questions about this item

Will this 16 GB DDR4 2400 MHz DIMM fit my desktop motherboard?

It uses the standard 288-pin DDR4 DIMM form factor and runs at 1.2 V; check your board's manual for supported DDR4 speeds and maximum capacity per slot.

Can I mix this module with my existing DDR4 memory?

Mixing is possible when speeds and voltages match; the system will run all modules at the slowest rated speed, so confirm your current RAM is also DDR4 2400 at 1.2 V.

Is this module a direct replacement for Samsung M378A2K43BB1-CRC or M378A2K43CB1-CRC?

Yes, the product is listed as a compatible replacement for both Samsung part numbers, matching capacity, speed, voltage, and 2Rx8 organisation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.