A-Tech
A-Tech 16GB DDR4 3200MHz CL22 1.2V 260-pin SODIMM laptop RAM
A 16 GB DDR4 3200 MHz SO-DIMM with CL22 latency and 1.2 V operation for laptop memory upgrades
- Capacity16GB
- Type260-Pin DDR4 SO-DIMM
- SpeedDDR4 3200 (PC4 25600)
- CAS LatencyCL22
- Voltage1.20V
- ECCNo
- 16GB capacity handles heavy multitasking and large workloads
- DDR4 3200MHz speed accelerates application loading and system responsiveness
- CL22 latency with 1.2V voltage balances performance and power efficiency
- 260-pin SODIMM form factor fits standard laptop memory slots
- Tested compatible replacement for Micron MTA8ATF2G64HZ-3G2B2 and MTA8ATF2G64HZ-3G2F1 modules
What this module is and who it fits
A 16GB DDR4 3200MHz SODIMM built as a direct replacement for Micron MTA8ATF2G64HZ-3G2B2 and MTA8ATF2G64HZ-3G2F1 part numbers. It runs at CL22 latency on standard 1.2V power without ECC or buffering. The 260-pin form factor targets laptops, notebooks and all-in-one systems that accept DDR4 SO-DIMM memory.
What to verify on your laptop before ordering
Confirm the system uses DDR4 SO-DIMM slots and supports 3200MHz operation at 1.2V. Check the maximum module capacity and total memory limit allowed by the manufacturer. Ensure the board accepts non-ECC unbuffered modules and has a free 260-pin slot for this single 16GB stick.
When the upgrade makes sense
Replaces an existing Micron MTA8ATF2G64HZ-3G2B2 or MTA8ATF2G64HZ-3G2F1 module that has failed or when adding capacity to a compatible slot. The jump is worthwhile if your current memory is slower than 3200MHz or if you need more than 8GB to handle heavier multitasking workloads. Buyers who need ECC error correction or registered buffering should look elsewhere.
Highlights
- 16GB capacity handles heavy multitasking and large workloads
- DDR4 3200MHz speed accelerates application loading and system responsiveness
- CL22 latency with 1.2V voltage balances performance and power efficiency
- 260-pin SODIMM form factor fits standard laptop memory slots
- Tested compatible replacement for Micron MTA8ATF2G64HZ-3G2B2 and MTA8ATF2G64HZ-3G2F1 modules
Specifications
| Brand | A-Tech |
|---|---|
| Series | Compatible Replacement for Micron |
| Model | MTA8ATF2G64HZ-3G2B2, MTA8ATF2G64HZ-3G2F1 |
| Capacity | 16GB |
| Type | 260-Pin DDR4 SO-DIMM |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | CL22 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Heat Spreader | No |
| Features | MTA8ATF2G64HZ-3G2B2, MTA8ATF2G64HZ-3G2F1 |
| Recommend Use | Compatible Replacement for Micron MTA8ATF2G64HZ-3G2B2, MTA8ATF2G64HZ-3G2F1 |
Questions about this item
Does the 260-pin SODIMM arrive as a single 16 GB module or do I need to buy anything else?
The package contains one 16 GB DDR4 3200 MHz CL22 1.2 V 260-pin SODIMM; no extra parts or cables are required for installation.
Should I choose the 3200 MHz CL22 version or a different speed and latency for my laptop?
Select this 3200 MHz CL22 module when your system specifies DDR4 3200 (PC4-25600) SO-DIMM memory; matching the rated speed and CAS latency avoids down-clocking.
What does the PC4-25600 rating mean once the stick is installed in my machine?
PC4-25600 indicates a peak transfer rate of 25 600 MB/s at 3200 MHz, so the module delivers that bandwidth when the laptop's memory controller runs at the rated speed.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



