We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Six green DDR4 LRDIMM modules with black chips, no heat spreaders

A-Tech

A-Tech 192GB (6x32GB) DDR4 2133 ECC LRDIMM 4Rx4 memory upgrade

SKU CH-CSA7-E5V6Z

192 GB DDR4 ECC load-reduced kit with six 32 GB modules at 2133 MHz for 13th-generation Dell PowerEdge rack servers

  • Capacity192GB (6 x 32GB)
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 2133 (PC4 17000)
  • CAS LatencyCL15
  • Voltage1.20V
  • ECCYes
  • 192 GB total capacity with six 32 GB modules
  • Load-reduced ECC design improves signal integrity on dense configurations
  • DDR4 2133 MHz CL15 at 1.2 V for efficient throughput
  • Validated for Dell PowerEdge 13th generation rack servers
  • Quad-rank 4Rx4 organisation maximises density per DIMM slot

Server Memory Kit

This 192GB kit contains six 32GB DDR4 LRDIMM modules built for Dell PowerEdge 13th generation rack servers. It targets administrators upgrading R430, R530, R630, R730, R730xd, R830 or R930 platforms that require ECC load-reduced memory. The modules operate at 1.2V with a CL15 latency rating. Buyers needing non-ECC unbuffered DIMMs for workstations cannot use this product.

DDR4 2133 Interface Limits

The DDR4 2133 standard caps transfer rates at PC4-17000, so the kit runs at the speed of the slowest module installed. Mixing ECC load-reduced with ECC registered DIMMs is not supported; all populated slots must share the same ECC type. System documentation dictates the correct channel population order for quad-rank 4Rx4 modules. Servers that only accept registered DIMMs will not accept these load-reduced modules.

Build And Daily Handling

Each module uses a 288-pin DDR4 form factor without a heat spreader, relying on server chassis airflow for cooling. The quad-rank 4Rx4 organisation increases density per slot but requires the memory controller to support load-reduced buffering. Six modules fill multiple channels on compatible PowerEdge models, so installers must follow the vendor seating guide to avoid boot failures. Modules are validated as a matched kit for the listed server families.

Highlights

  • 192 GB total capacity with six 32 GB modules
  • Load-reduced ECC design improves signal integrity on dense configurations
  • DDR4 2133 MHz CL15 at 1.2 V for efficient throughput
  • Validated for Dell PowerEdge 13th generation rack servers
  • Quad-rank 4Rx4 organisation maximises density per DIMM slot

Specifications

BrandA-Tech
Series13th Gen Dell PowerEdge Rack Server Compatible
Model192GB (6x32GB) 4Rx4 DDR4-2133 LRDIMM for Dell PowerEdge R430, R530, R630, R630 XL, R730, R730 XL, R730xd, R730xd XL, R830, R930
Part NumberNE-MS-0061
Capacity192GB (6 x 32GB)
Type288-Pin DDR4 SDRAM
SpeedDDR4 2133 (PC4 17000)
CAS LatencyCL15
Voltage1.20V
ECCYes
Buffered/RegisteredLoad Reduced
Rank4Rx4 / 4DRx4
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemDell PowerEdge R430, R530, R630, R630 XL, R730, R730 XL, R730xd, R730xd XL, R830, R930 | 13th Gen Rack Servers
OptionCompatible with Dell PowerEdge R430, R530, R630, R630 XL, R730, R730 XL, R730xd, R730xd XL, R830, R930
FeaturesDesigned for Dell PowerEdge R430, R530, R630, R630 XL, R730, R730 XL, R730xd, R730xd XL, R830, R930
Package ContentSix Modules

Questions about this item

Should I choose the 6x32GB kit or buy smaller modules to reach 192GB?

The kit provides six 32GB modules for a total of 192GB, matching the maximum supported capacity on compatible 13th Gen Dell PowerEdge servers without mixing ranks.

What does the 2133MHz speed mean once installed in a PowerEdge R730?

The modules run at DDR4 2133 (PC4-17000) with CL15 latency; if faster DIMMs are already present the system will downclock all memory to 2133MHz.

Is the LRDIMM 4Rx4 interface compatible with standard registered DIMM slots in the R630?

No — these are ECC Load Reduced DIMMs (LRDIMM) with a 4Rx4 organisation; they cannot be mixed with registered DIMMs and require LRDIMM-only memory channels.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.