We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four green DDR4 server memory modules with black chips and gold contacts

A-Tech

A-Tech 1TB (4x256GB) DDR4 3200 ECC LRDIMM 2S4Rx4 Server RAM

SKU CH-3N3E-5CQNP

Quad-channel kit of four 256 GB DDR4 3200 ECC load-reduced DIMMs for server and workstation upgrades

  • Capacity1TB (4 x 256GB)
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 3200 (PC4 25600)
  • CAS LatencyCL22
  • Voltage1.20V
  • ECCYes

Capacity 1TB (4 x 256GB)

  • Massive 1 TB capacity across four 256 GB modules
  • DDR4 3200 MHz speed accelerates data-intensive workloads
  • ECC Load Reduced DIMM corrects errors and reduces electrical load
  • Octal-rank 3DS/TSV architecture fits high-density server slots
  • Standard 1.20 V DDR4 voltage for efficient power draw

Server Memory Kit

This 1 TB quad-channel kit contains four 256 GB DDR4 ECC LRDIMM modules built for servers and workstations that require registered load-reduced memory. It is not compatible with desktop or laptop computers.

Thermals and Power

Modules operate at the standard DDR4 voltage of 1.20 V and have no heat spreaders. The load-reduced buffer reduces electrical load on the memory controller, helping to keep power draw and thermals within normal server limits during sustained workloads.

Rank and Pinout

Each module uses a 288-pin DIMM form factor with 2S4Rx4 octal-rank x4 3DS/TSV organisation. The system memory controller must support this specific rank structure and LRDIMM protocol for the kit to function.

Highlights

  • Massive 1 TB capacity across four 256 GB modules
  • DDR4 3200 MHz speed accelerates data-intensive workloads
  • ECC Load Reduced DIMM corrects errors and reduces electrical load
  • Octal-rank 3DS/TSV architecture fits high-density server slots
  • Standard 1.20 V DDR4 voltage for efficient power draw

Specifications

BrandA-Tech
SeriesA-Tech DDR4 Server Memory RAM
ModelA-Tech 256GB 2S4Rx4 PC4-3200AA-L
Part NumberAT256G4D4D3200LO4N12V
Capacity1TB (4 x 256GB)
Type288-Pin DDR4 SDRAM
SpeedDDR4 3200 (PC4 25600)
CAS LatencyCL22
Voltage1.20V
ECCYes
Buffered/RegisteredLoad Reduced
Rank2S4Rx4 (8Rx4 3DS/TSV)
Multi-channel KitQuad Channel Kit
ChipsetMajor Brand Chipset
Heat SpreaderNo
FeaturesMajor Brand Chips / Error Correcting Technology for Server Systems

Other versions of this model

3 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How do I install these 288-pin DDR4 LRDIMM modules and which step is most often missed?

Power off the server, open the chassis, align each module's notch with the slot key, press firmly until both retention clips click, then verify in BIOS that all four 256GB modules are detected at 3200 MHz; the step most often missed is checking the system manual for the correct quad-channel population order.

What maintenance or replacement will this 1TB ECC LRDIMM kit need over its service life?

No routine maintenance is required; the modules have no heat spreader and run at 1.20V, so keep server airflow clean and monitor ECC corrected-error counts — replace a module only if uncorrectable errors appear or the system logs a DIMM failure.

What is the first limit that appears when this octal-rank 3DS memory runs under sustained heavy load?

The CAS latency of CL22 at 3200 MHz sets the timing ceiling; under sustained load the memory controller's rank-to-rank switching latency and thermal throttling of the dense 3DS/TSV stacks become the limiting factors before bandwidth saturates.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.