We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

A-Tech

A-Tech 32GB (4x8GB) DDR4 2133 ECC RDIMM 1Rx4 CL15 1.2V Server RAM

SKU CH-ZT20-JDC0Q

32 GB DDR4 ECC registered server memory kit, four 8 GB single-rank modules at 2133 MHz CL15 and 1.2 V

  • Capacity32GB (4 x 8GB)
  • SpeedDDR4 2133 (PC4 17000)
  • CAS LatencyCL15
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered

Capacity 32GB (4 x 8GB)

  • 32 GB quad-channel kit expands server memory capacity
  • DDR4 2133 MHz CL15 timing accelerates data throughput
  • ECC registered DIMM corrects errors for reliable operation
  • 2 V standard voltage reduces power draw per module
  • 288-pin 1Rx4 form factor fits DDR4 server slots

32GB DDR4 ECC RDIMM kit

This 32GB kit contains four 8GB DDR4 2133 MHz registered DIMMs built for servers and workstations. Each module uses a 1Rx4 single-rank layout and operates at 1.2V with CL15 latency. The kit is not compatible with desktop or laptop computers.

Registered ECC requirement

Your system must support DDR4 registered ECC RDIMM memory; the modules will not work in platforms that accept only unbuffered non-ECC DIMMs. Verify the motherboard or server manual for qualified memory configurations before purchasing.

Straightforward DIMM installation

Align the 288-pin modules with the DDR4 DIMM slots and press firmly until the retention clips lock. Follow the manufacturer's channel population rules for quad-channel operation. A common issue is mixing registered and unbuffered DIMMs, which prevents the system from posting.

Highlights

  • 32 GB quad-channel kit expands server memory capacity
  • DDR4 2133 MHz CL15 timing accelerates data throughput
  • ECC registered DIMM corrects errors for reliable operation
  • 2 V standard voltage reduces power draw per module
  • 288-pin 1Rx4 form factor fits DDR4 server slots

Specifications

BrandA-Tech
SeriesA-Tech DDR4 Server Memory RAM
ModelA-Tech 8GB 1Rx4 PC4-2133P-R
Capacity32GB (4 x 8GB)
SpeedDDR4 2133 (PC4 17000)
CAS LatencyCL15
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4
Multi-channel KitQuad Channel Kit
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Will the 2133 MHz rating hold once the kit is installed in a server?

The modules run at DDR4 2133 MHz (PC4-17000) when the platform supports that speed; actual operating frequency follows the system's memory controller and populated channel configuration.

What does the registered ECC RDIMM interface mean for bandwidth limits?

Registered ECC RDIMM adds a register between the DRAM and the memory bus, allowing higher module counts per channel while ECC corrects single-bit errors; peak bandwidth is capped by the DDR4 2133 data rate.

How many 288-pin DIMM slots does this quad-channel kit occupy?

The kit contains four 8 GB modules, each a 288-pin DDR4 DIMM, so it fills four slots — one per channel in a quad-channel server or workstation board.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.