We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green printed circuit board with black memory chips and gold edge contacts

A-Tech

A-Tech 32GB DDR4 2133 ECC RDIMM 2Rx4 memory upgrade

SKU CH-WZJP-HR6QE

32 GB DDR4 2133 MHz ECC registered DIMM for Dell PowerEdge 13th Gen rack servers

  • Capacity32GB
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 2133 (PC4 17000)
  • CAS LatencyCL15
  • Voltage1.20V
  • ECCYes

Capacity 32GB

Show 4 more configurations

Speed DDR4 2133 (PC4 17000)

  • Boosts server capacity with a single 32GB module
  • ECC registered design protects data integrity in critical workloads
  • Runs at DDR4 2133MHz CL15 for responsive performance
  • Low 1.2V operation reduces power draw per module
  • Validated for Dell PowerEdge 13th Gen rack servers

32GB DDR4 2133 ECC RDIMM for Dell 13th Gen Rack

This 32GB registered DIMM runs at 2133MHz with CL15 latency and 1.20V operation. It is built for Dell PowerEdge R430, R530, R630, R630 XL, R730, R730 XL, R730xd, R730xd XL, R830 and R930 servers. The module uses a 2Rx4 organisation and major-brand chipset. It is not compatible with desktop or laptop systems that require non-ECC unbuffered memory.

Thermals, noise and power draw in normal use

The module operates at the standard DDR4 voltage of 1.20V and has no heat spreader. Registered buffering reduces electrical load on the server memory controller. Power consumption scales with capacity and rank configuration. Acoustic output is silent as the DIMM contains no moving parts.

Build quality and connector implications

The 288-pin DDR4 form factor fits the registered DIMM slots of the listed 13th Gen PowerEdge platforms. ECC registered and ECC load-reduced modules cannot be mixed; all installed modules must share the same ECC type. Speeds may be mixed, but the system will run at the speed of the slowest module. One module is supplied per package.

Highlights

  • Boosts server capacity with a single 32GB module
  • ECC registered design protects data integrity in critical workloads
  • Runs at DDR4 2133MHz CL15 for responsive performance
  • Low 1.2V operation reduces power draw per module
  • Validated for Dell PowerEdge 13th Gen rack servers

Specifications

BrandA-Tech
Series13th Gen Dell PowerEdge Rack Server Compatible
Model32GB 2Rx4 DDR4-2133 RDIMM for Dell PowerEdge R430, R530, R630, R630 XL, R730, R730 XL, R730xd, R730xd XL, R830, R930
Part NumberNE-MS-0045
Capacity32GB
Type288-Pin DDR4 SDRAM
SpeedDDR4 2133 (PC4 17000)
CAS LatencyCL15
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemDell PowerEdge R430, R530, R630, R630 XL, R730, R730 XL, R730xd, R730xd XL, R830, R930 | 13th Gen Rack Servers
OptionCompatible with Dell PowerEdge R430, R530, R630, R630 XL, R730, R730 XL, R730xd, R730xd XL, R830, R930
FeaturesDesigned for Dell PowerEdge R430, R530, R630, R630 XL, R730, R730 XL, R730xd, R730xd XL, R830, R930
Package ContentOne Module

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How do I install this 288-pin DDR4 RDIMM in my Dell PowerEdge R730 and which slot-population rule trips people up?

Power down the server, open the chassis, align the module key with the slot, and press firmly until the ejectors click. The common mistake is mixing this 2Rx4 registered DIMM with load-reduced or unbuffered modules — all installed DIMMs must share the same ECC type.

What maintenance or replacement will this 32GB 2133MHz module need over its service life?

No scheduled maintenance is required for the module itself. Keep the server air filters clean so the 1.20V DRAM stays within thermal limits. Replace the unit only if diagnostics report uncorrectable ECC errors or the system fails to POST with this DIMM seated.

What is the first limit that appears when this CL15 2Rx4 RDIMM runs sustained workloads?

The memory controller caps throughput at the slowest installed speed — 2133 MT/s PC4-17000. If faster DIMMs share the channel, they down-clock to this rate. Thermal throttling on the unbuffered 2Rx4 chips can also activate before bandwidth saturates.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.