We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green 288-pin DDR4 DIMM module with black chips and gold contacts

A-Tech

A-Tech 32GB DDR4 2133MHz ECC RDIMM 2Rx4 Server Memory

SKU CH-P2HE-E53CZ

32 GB DDR4 2133 MHz ECC registered DIMM with 2Rx4 organisation and 1.2 V operation

  • Capacity32GB
  • SpeedDDR4 2133 (PC4 17000)
  • CAS LatencyCL15
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 32 GB capacity handles large server workloads
  • DDR4 2133 MHz speed supports fast data throughput
  • ECC registered design corrects errors for data integrity
  • CL15 latency at 1.20 V balances performance and efficiency
  • Compatible replacement for Cisco UCS-MR-1X322RU-A and related part numbers

32GB DDR4 ECC RDIMM for Cisco UCS

This 32GB registered DIMM is built for Cisco UCS servers and workstations that require ECC memory. It replaces part numbers UCS-MR-1X322RU-A, UCS-MR-1X322RU-G and related Cisco spares. The module suits administrators upgrading validated platforms where data integrity and registered buffering are mandatory. Buyers needing non-ECC or unbuffered memory for consumer boards cannot use this module.

Capacity and speed headroom

The single 32GB rank delivers 2133 MT/s at CL15 on 1.20V, matching the PC4-17000 specification. A 2Rx4 organisation provides density for virtualisation hosts and database nodes that benefit from large per-slot capacity. Workloads demanding higher frequencies or lower latencies than DDR4-2133 will not gain from this module.

Registered DIMM build and 288-pin fit

Registered signalling reduces electrical load on the memory controller, enabling stable operation in multi-DIMM server configurations. The 288-pin DDR4 DIMM form factor seats in standard server slots keyed for registered ECC modules. Systems that accept only unbuffered UDIMMs or a different pin count will not recognise this memory.

Highlights

  • 32 GB capacity handles large server workloads
  • DDR4 2133 MHz speed supports fast data throughput
  • ECC registered design corrects errors for data integrity
  • CL15 latency at 1.20 V balances performance and efficiency
  • Compatible replacement for Cisco UCS-MR-1X322RU-A and related part numbers

Specifications

BrandA-Tech
SeriesCompatible Replacement for Cisco
ModelUCS-MR-1X322RU-A, UCS-MR-1X322RU-G, 15-103025-01, 15-10325-02, 15-103695-01
Capacity32GB
SpeedDDR4 2133 (PC4 17000)
CAS LatencyCL15
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor Brand Chipset
FeaturesUCS-MR-1X322RU-A, UCS-MR-1X322RU-G, 15-103025-01, 15-10325-02, 15-103695-01

Questions about this item

Will the 2Rx4 registered ECC DDR4 2133MHz module run with my existing CL15 1.20V DDR4 RDIMMs?

Yes, it matches the same DDR4 2133MHz PC4-17000 speed, CL15 latency, 1.20V voltage, ECC registered design and 2Rx4 rank, so it will operate alongside identical spec modules.

How can I confirm the 32GB DDR4 2133MHz ECC RDIMM is detected correctly after installation?

Check the server BIOS or UEFI memory information screen — it should show a single 32GB DDR4 2133MHz registered ECC module at 1.20V with CL15 timing and 2Rx4 organisation.

Does the box contain only the 288-pin DDR4 DIMM or are any cables or brackets included?

The package includes one 32GB DDR4 2133MHz ECC RDIMM 2Rx4 module; no cables, brackets or additional accessories are supplied.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.