We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Single green 288-pin DIMM module with black chips and a white label showing 32GB DDR4 3200 CL22 1.2V

A-Tech

A-Tech 32GB DDR4 3200MHz CL22 1.2V 288-Pin Desktop RAM

SKU CH-ZQFA-2NM1D

32 GB DDR4 module running at 3200 MHz with CL22 latency and 1.2 V operation

  • Capacity32GB
  • SpeedDDR4 3200 (PC4 25600)
  • Tested Frequency3200
  • CAS LatencyCL22
  • Voltage1.20V
  • ECCNo
  • 32 GB capacity for demanding multitasking workloads
  • DDR4 3200 MHz speed for fast data throughput
  • CL22 latency at 1.2 V standard voltage
  • 288-pin unbuffered DIMM fits desktop motherboards
  • Tested replacement for IBM-Lenovo part 4X71D07932

32GB DDR4 3200MHz Desktop Module

This single 32GB DDR4 DIMM runs at 3200MHz with a CAS latency of 22 and operates at the standard 1.2V. It is an unbuffered non-ECC module designed for desktop systems that accept 288-pin memory.

288-Pin DIMM Build and Compatibility

The module uses major-brand chips and follows the standard 288-pin UDIMM layout, so it fits any desktop slot wired for DDR4. It is listed as a direct replacement for the IBM-Lenovo 4X71D07932 part number and is tested for AMD and Intel platforms.

DDR4 3200MHz Interface Limits

The PC4-25600 rating sets the maximum data rate at 3200 MT/s, and the CL22 timing defines the latency ceiling for this module. Systems that only support lower DDR4 speeds will downclock the memory automatically, while boards limited to lower maximum capacities per slot may not recognise the full 32GB.

Highlights

  • 32 GB capacity for demanding multitasking workloads
  • DDR4 3200 MHz speed for fast data throughput
  • CL22 latency at 1.2 V standard voltage
  • 288-pin unbuffered DIMM fits desktop motherboards
  • Tested replacement for IBM-Lenovo part 4X71D07932

Specifications

BrandA-Tech
Capacity32GB
SpeedDDR4 3200 (PC4 25600)
Tested Frequency3200
CAS LatencyCL22
Voltage1.20V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor Brand Chips
FeaturesMajor Brand Chipset
Recommend UseAMD & Intel Compatible

Questions about this item

Will this 32 GB DDR4 3200 MHz module fit a desktop motherboard with 288-pin DIMM slots?

Yes, the module uses the standard 288-pin UDIMM form factor and runs at 1.2 V, so it installs in any desktop board that supports DDR4 3200 non-ECC memory.

Can I add this stick alongside existing 3200 MHz CL22 RAM to run dual-channel?

If your board has a free slot and the current kit is also DDR4 3200 CL22 1.2 V non-ECC, the new module will pair for dual-channel operation.

Is this the correct replacement for the IBM-Lenovo part number 4X71D07932?

The module is listed as a compatible equivalent for that exact Lenovo part number, matching capacity, speed, voltage and pin layout.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.