We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green bare circuit board 288-pin DDR5 module with black DRAM chips no heat spreader

A-Tech

A-Tech 32GB DDR5 4800 ECC UDIMM 2Rx8 Server RAM

SKU CH-V4HR-38374

32 GB DDR5 4800 ECC UDIMM module with 2Rx8 organisation and 1.10 V operation

  • Capacity32GB
  • Type288-Pin DDR5 SDRAM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS Latency40
  • Voltage1.10V
  • ECCYes
  • 32 GB capacity handles heavy server workloads
  • DDR5 4800 MT/s delivers high memory bandwidth
  • ECC protection detects and corrects data errors
  • 1 V operation reduces power consumption
  • 2Rx8 dual-rank layout maximises module density

32GB DDR5 ECC UDIMM for servers

This 32GB DDR5 4800 module adds error-correcting memory to compatible server platforms. It targets administrators who need data integrity for critical workloads without registered buffering. The unbuffered design suits systems that accept UDIMM ECC rather than RDIMM.

288-pin DDR5 slot requirement

Installation requires a motherboard with DDR5 UDIMM slots and ECC support in the BIOS. The module runs at the standard 1.1V DDR5 voltage and uses a 2Rx8 organisation. It frees no additional slots beyond the single DIMM occupied and adds no heat spreader to the build.

Sustained load with ECC overhead

Under continuous operation the ECC logic corrects single-bit errors on the fly, preventing silent data corruption during long compute runs. The CAS latency of 40 cycles applies at the rated 4800 MT/s speed. Without a heat spreader, airflow across the bare PCB becomes the primary thermal path during extended sessions.

Highlights

  • 32 GB capacity handles heavy server workloads
  • DDR5 4800 MT/s delivers high memory bandwidth
  • ECC protection detects and corrects data errors
  • 1 V operation reduces power consumption
  • 2Rx8 dual-rank layout maximises module density

Specifications

BrandA-Tech
SeriesCompatible Replacement for Kingston KSM48E40BD8KI-32HA
ModelA-Tech 32GB DDR5-4800 ECC UDIMM Server RAM Module
Capacity32GB
Type288-Pin DDR5 SDRAM
SpeedDDR5 4800 (PC5 38400)
CAS Latency40
Voltage1.10V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
FeaturesMajor Brand DRAM IC Chips

Questions about this item

How does the CAS latency of 40 affect sustained throughput on this DDR5 4800 module?

The CL40 timing at 4800 MT/s sets the minimum cycle delay; under continuous load the memory controller cannot issue new commands faster than this latency allows, making it the first bottleneck for sustained bandwidth.

What thermal or acoustic impact should I expect when this unbuffered ECC UDIMM runs at 1.10 V all day?

With no heat spreader and standard 1.10 V DDR5 voltage, the module relies on case airflow; it generates modest heat and zero fan noise of its own, so temperatures stay within normal DDR5 limits in a ventilated chassis.

Which motherboard feature must my system already provide for this 288-pin DDR5 ECC UDIMM to function?

The board needs a DDR5 UDIMM slot with on-die ECC support and an unbuffered memory controller; registered or RDIMM-only platforms will not accept this 2Rx8 module.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.