We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green 240-pin DDR3 registered DIMM with black chips

A-Tech

A-Tech 4GB DDR3 1066MHz ECC RDIMM 2Rx8 Server Memory

SKU CH-VMHE-WAS9V

4GB DDR3 1066MHz ECC registered DIMM with 2Rx8 organisation for server and workstation upgrades

  • Capacity4GB
  • SpeedDDR3 1066 (PC3 8500)
  • CAS LatencyCL7
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 4GB capacity expands server multitasking headroom
  • DDR3 1066MHz speed accelerates data throughput
  • ECC registered design protects critical workload integrity
  • 240-pin DIMM fits standard DDR3 server slots
  • 5V operation matches DDR3 platform specifications

Server DDR3 ECC RDIMM

This A-Tech module adds 4GB of registered ECC memory to compatible servers and workstations. It uses a 240-pin DDR3 DIMM form factor and is built as a direct replacement for the Samsung M393B5273BH1-CF8 part. The 2Rx8 organisation and major-brand chips are intended for systems that require error correction and registered buffering.

DDR3 1066 practical limits

DDR3 1066 (PC3-8500) tops out at 1066 MT/s with a standard 1.5V supply, so bandwidth is capped at the PC3-8500 level. Registered signalling adds one clock cycle of latency, and the platform's memory controller determines the maximum usable capacity and populated slot count. Mixing speeds will force all modules to run at the lowest common rate.

Registered ECC requirement

The module is an ECC RDIMM, so it only works in systems whose chipset and BIOS explicitly support registered error-correcting memory. Desktop or consumer boards that accept only unbuffered non-ECC DIMMs will not recognise it. Verify the platform's qualified-vendor list before purchase.

Highlights

  • 4GB capacity expands server multitasking headroom
  • DDR3 1066MHz speed accelerates data throughput
  • ECC registered design protects critical workload integrity
  • 240-pin DIMM fits standard DDR3 server slots
  • 5V operation matches DDR3 platform specifications

Specifications

BrandA-Tech
Capacity4GB
SpeedDDR3 1066 (PC3 8500)
CAS LatencyCL7
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Questions about this item

Should I choose the 4GB DDR3 1066MHz ECC RDIMM or a different capacity for my server?

This module provides 4GB in a single 240-pin DDR3 ECC RDIMM running at 1066MHz. Select it when your system requires registered ECC memory at that speed and you need a 4GB increment.

What does PC3-8500 mean for real-world throughput in my machine?

PC3-8500 is the JEDEC designation for DDR3 1066MHz memory. Your actual throughput depends on the platform's memory controller and how many channels it populates.

Does the 240-pin DDR3 interface limit the 1066MHz speed in practice?

The 240-pin DDR3 form factor carries the 1066MHz signal. The registered buffer and ECC logic operate at that frequency, so the interface itself does not impose a lower cap.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.