We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green 240-pin DDR3 DIMM with black chips, 4GB 1333MHz

A-Tech

A-Tech 4GB DDR3 1333 PC3-10600 2Rx8 240-Pin Desktop RAM for Samsung M378B5273BH1-CH9 M378B5273CH0-CH9

SKU CH-BQ3T-FK48S

A 4GB DDR3 1333MHz desktop DIMM replacement for Samsung modules, 240-pin, 1.5V, non-ECC unbuffered

  • Capacity4GB
  • SpeedDDR3 1333 (PC3 10600)
  • Tested Frequency1333
  • Voltage1.50V
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • 4GB capacity adds headroom for multitasking
  • DDR3 1333MHz speed matches PC3-10600 rating
  • 240-pin DIMM fits standard desktop slots
  • 5V operation follows DDR3 standard voltage
  • Tested compatible with Samsung M378B5273 and M379B5273 modules

4GB DDR3 1333 Desktop Module

This 4GB DDR3 1333 DIMM is a non-ECC unbuffered memory module built for desktop computers. It operates at the standard 1.5V voltage and uses a 240-pin interface. The module is designed for users who need a direct replacement for specific Samsung part numbers or a straightforward capacity increase for an older system.

Replaces Samsung DDR3 1333 Modules

The module serves as a compatible replacement for Samsung M378B5273BH1-CH9, M378B5273CH0-CH9, M378B5273DH0-CH9, and M379B5273CH0-CH9 parts. The upgrade is worth it when your current memory matches those part numbers or when your desktop requires DDR3 1333 PC3-10600 specification to restore performance. It is not for systems that require ECC registered memory or a different DDR generation.

Fits Standard 240-Pin DDR3 Slots

Installation requires an available 240-pin DDR3 DIMM slot on a desktop motherboard that supports 1.5V unbuffered memory. The single 4GB module leaves additional slots free for future expansion if the board has more than one slot. Verify your system documentation for maximum supported capacity and slot population rules before purchasing.

Highlights

  • 4GB capacity adds headroom for multitasking
  • DDR3 1333MHz speed matches PC3-10600 rating
  • 240-pin DIMM fits standard desktop slots
  • 5V operation follows DDR3 standard voltage
  • Tested compatible with Samsung M378B5273 and M379B5273 modules

Specifications

BrandA-Tech
Capacity4GB
SpeedDDR3 1333 (PC3 10600)
Tested Frequency1333
Voltage1.50V
ECCNo
Buffered/RegisteredUnbuffered
Recommend UseAMD & Intel Compatible

Questions about this item

Will this module fit a desktop board that takes 240-pin DDR3 DIMMs?

Yes, it is a 240-pin unbuffered DDR3 DIMM, the standard form factor for desktop systems that support DDR3 1333 memory.

Can I use this 4 GB stick alongside my existing 1.5 V DDR3 modules?

The module runs at the standard 1.5 V, so it will operate at the same voltage as other DDR3 1333 sticks you may already have installed.

Does this replace Samsung part numbers M378B5273BH1-CH9, M378B5273CH0-CH9, M378B5273DH0-CH9 and M379B5273CH0-CH9?

It is listed as a compatible replacement for all four of those Samsung part numbers.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.