We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with black memory chips and gold contacts

A-Tech

A-Tech 4GB DDR3 1333MHz PC3-10600 240-Pin Desktop RAM for Micron MT16JTF51264AZ-1G4

SKU CH-VYVQ-127P8

A 4GB DDR3 1333MHz desktop DIMM with 240 pins and 1.5V operation for Micron-compatible systems

  • Capacity4GB
  • SpeedDDR3 1333 (PC3 10600)
  • Tested Frequency1333
  • Voltage1.50V
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • Boosts system responsiveness with 4GB DDR3 1333MHz capacity
  • Fits standard desktop slots using 240-pin DIMM form factor
  • Runs at standard 1.5V DDR3 voltage for broad compatibility
  • Non-ECC unbuffered design suits mainstream AMD and Intel platforms
  • Replaces Micron MT16JTF51264AZ-1G4 and matching part numbers

4GB DDR3 1333MHz DIMM for desktop upgrades

This A-Tech module delivers 4GB of DDR3 memory at 1333MHz with a PC3-10600 rating. It uses a standard 240-pin DIMM form factor and runs at 1.5V. The unbuffered, non-ECC design suits mainstream desktop systems from AMD and Intel platforms.

Replaces Micron MT16JTF51264AZ-1G4 series modules

The kit serves as a direct replacement for Micron part numbers MT16JTF51264AZ-1G4, MT16JTF51264AZ-1G4D1, MT16JTF51264AZ-1G4H1 and MT16JTF51264AZ-1G4M1. Upgrading is worthwhile when your current installation uses lower-capacity DDR3 sticks or empty slots limit multitasking headroom.

Check your motherboard DDR3 slot count

Verify that the board accepts unbuffered, non-ECC DDR3 DIMMs at 1.5V and 1333MHz. Confirm the total memory limit per channel and the number of free 240-pin slots before ordering. Systems requiring registered or ECC memory cannot use this module.

Highlights

  • Boosts system responsiveness with 4GB DDR3 1333MHz capacity
  • Fits standard desktop slots using 240-pin DIMM form factor
  • Runs at standard 1.5V DDR3 voltage for broad compatibility
  • Non-ECC unbuffered design suits mainstream AMD and Intel platforms
  • Replaces Micron MT16JTF51264AZ-1G4 and matching part numbers

Specifications

BrandA-Tech
Capacity4GB
SpeedDDR3 1333 (PC3 10600)
Tested Frequency1333
Voltage1.50V
ECCNo
Buffered/RegisteredUnbuffered
Recommend UseAMD & Intel Compatible

Questions about this item

Does the 240-pin DIMM fit a standard desktop DDR3 slot?

Yes, the module uses the standard 240-pin DDR3 DIMM form factor that matches any desktop motherboard slot designed for DDR3 memory.

What is the correct way to seat the module so the 1.5V contacts connect properly?

Align the notch on the module with the key in the slot, press down firmly until both side clips click into place, and verify the module sits evenly without a gap.

Will the 4GB capacity require a BIOS update or replacement later?

The 4GB capacity is fixed on this module; if your system needs more memory you would add another compatible DDR3 DIMM rather than replace this one.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.