A-Tech
A-Tech 4GB DDR3 1600 PC3-12800 240-Pin Desktop RAM for Hynix HMT351U6BFR8C-PB HMT351U6CFR8C-PB
4GB DDR3 1600MHz desktop DIMM with 240 pins and 1.5V operation for Hynix replacements
- Capacity4GB
- SpeedDDR3 1600 (PC3 12800)
- Tested Frequency1600
- Voltage1.50V
- ECCNo
- Buffered/RegisteredUnbuffered
- 4GB module expands desktop capacity for smoother multitasking
- DDR3 1600 speed delivers responsive data throughput
- 240-pin DIMM fits standard desktop memory slots
- 5V operation matches DDR3 standard voltage
- Non-ECC unbuffered design suits mainstream desktop systems
4GB DDR3 1600 Desktop Module
This single 4GB DDR3 DIMM runs at 1600 MHz with a PC3-12800 rating and operates at the standard 1.5 V. It is an unbuffered, non-ECC module built to replace Hynix HMT351U6BFR8C-PB, HMT351U6CFR8C-PB or HMT351U6EFR8C-PB parts in compatible desktop systems.
240-Pin DIMM Fit and System Room
The 240-pin form factor slots into any desktop motherboard that accepts DDR3 UDIMMs, leaving other memory channels open for additional modules if the board supports them. Because it draws the standard 1.5 V, it works with the existing power delivery of the platform without requiring a voltage change.
Steady 1600 MHz Operation Under Load
Tested at 1600 MHz, the module maintains its rated frequency during extended workloads rather than throttling after a short burst. Quality-assurance testing on each stick ensures reliable performance when the system runs memory-intensive tasks for long periods.
Highlights
- 4GB module expands desktop capacity for smoother multitasking
- DDR3 1600 speed delivers responsive data throughput
- 240-pin DIMM fits standard desktop memory slots
- 5V operation matches DDR3 standard voltage
- Non-ECC unbuffered design suits mainstream desktop systems
Specifications
| Brand | A-Tech |
|---|---|
| Capacity | 4GB |
| Speed | DDR3 1600 (PC3 12800) |
| Tested Frequency | 1600 |
| Voltage | 1.50V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Recommend Use | AMD & Intel Compatible |
Questions about this item
Will the 1.50 V DDR3 module run within safe thermal limits during all-day workloads?
The stick operates at the standard 1.50 V DDR3 voltage, so heat output stays within the normal range for unbuffered 1600 MHz DIMMs under continuous use.
How loud is the memory when the system runs 24/7?
Memory modules have no moving parts, so the A-Tech 4 GB DDR3 1600 DIMM adds zero audible noise regardless of how long it runs.
What motherboard slot is needed for this 240-pin DIMM?
A desktop board with a standard DDR3 240-pin DIMM slot is required; the module is keyed for DDR3 only.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
PrimoChill
PrimoChill Praxis Wetbench Open-Air Test Bench 461.8mm
- Open-Air
$274.89
0.00355155BTC
In stock
Silverstone Technology
SilverStone Technology Strider 1200W 80 Plus Platinum Modular Power Supply
- ATX Mid Tower
- 1200W
$324.03
0.00418643BTC
In stock